Page 1 Pocket PC User Manual...
Page 2: Welcome
Welcome Congratulations on purchasing a Pocket PC. Due to the size and capabilities of this Pocket PC, you can keep your most important business and personal information up-to-date and close at hand. Microsoft  ActiveSync increases the power of your Pocket PC by allowing you to synchronize the information on your desktop or laptop computer with your Pocket PC.
Page 3: Safety Instructions
Safety Instructions ♥ This product is not charged when shipped from the factory. When you use this product the first time, we recommend that you install the battery as illustrated and fully charge it for about 8 hours before use. ♥...
Page 5: Table Of Contents
ELCOME ...1 AFETY NSTRUCTIONS ...3 HERE TO NFORMATION Getting Started / ...1-1 ACKAGE ONTENT ...1-1 XTERNAL IEWS ...1-2 Hardware Hotkey Functions...1-3 Rear Side...1-4 SING THE OCKET FOR THE Charging Power and Power Supply ...1-5 Configuration Wizard ...1-7 Using the Stylus to Touch the Screen ...1-7 Travel Charger ...1-8 Re-installation or Replacing the Battery ...1-9 OWER...
Page 6 Programs ...2-4 Navigation Bar and Command Bar ...2-6 ...2-7 YSTEM PPLICATION ROGRAMS NTER NFORMATION ON Enter Text Using the Input Panel ...2-11 Type with the Soft Keyboard...2-12 Use Letter Recognizer ...2-13 Use Block Recognizer ...2-13 Use Transcriber...2-14 Select Typed Text ...2-14 Write on the Screen...2-15 Write on the Screen ...2-15 Select Writing ...2-16...
Page 7 Toolbar...3-8 Call from Contacts...3-9 Call from Speed Dial ...3-9 Call from the Call History ...3-10 USTOMIZE HONE ...3-11 Sounds and Security...3-11 Other Phone Settings ...3-12 HONE PPLICATION ROGRAMS InCall Recognition...3-13 About InCall Recognition...3-13 InCall Recognition Settings...3-14 SIM Manager ...3-15 Standard Display...3-15 Full-Screen Display ...3-16 SMS Management ...3-17 SIM Tool Kit...3-17...
Page 8 Customize Your Pocket PC / ...4-1 DJUSTING ETTINGS ...4-1 OTIFICATIONS ...4-2 OWER REFERENCE ETTINGS ACKLIGHT ...4-4 ICROPHONE ...4-4 DJUST OLUME ...4-5 CENARIOS ...4-6 UICK ...4-7 IND AND RGANIZE NFORMATION UP MENUS ...4-10 EDEFINE ...4-11 Microsoft ActiveSync / ...5-1 NSTALLING AND SING YNCHRONIZATION USB S...
Page 9 Sending and Receiving Messages / ...7-1 MAILS AND ESSAGES SMS M Synchronizing E-mail Messages ...7-2 Connecting Directly to the Mail Server...7-3 E-mail Server Setup ...7-4 Using E-mails and SMS ...7-5 ESSENGER MSN M ...7-8 Setting Up ...7-8 Working with Contacts ...7-9 Chatting with Contacts ...7-10 OMPOSER MMS C...
Page 10 Digital Video Mode...9-5 Digital Video Mode Using Wizard...9-6 Speed Shooting Using the Hardware Hotkeys...9-7 ULTIMEDIA ANAGER ...9-8 Preview Multimedia Information...9-8 SlideShow Function ...9-9 Multimedia Manager Tools ...9-10 MAGE AKER ...9-11 MAGE IZARD ...9-13 Companion Programs / ...10-1 ALENDAR CHEDULING Create an Appointment ...10-3 Use the Summary Screen ...10-4 Create Meeting Requests ...10-4 Schedule a Meeting...10-5...
Page 11 Writing Mode ...10-17 Drawing Mode ...10-18 Recording Mode...10-18 OCKET XCEL ...10-19 Tips for Working in Pocket Excel ...10-20 INDOWS EDIA LAYER OCKET IE ...10-23 Using Pocket IE ...10-23 Browse the Internet...10-24 View Mobile Favorites and Channels ...10-25 The Mobile Favorites Folder...10-25 Favorite Links ...10-26 Synchronize Mobile Favorites ...10-26 Create a Mobile Favorite ...10-26...
Page 12 Add Programs Using ActiveSync...11-7 Add a Program Directly from the Internet ...11-8 Add a Program to the Start Menu ...11-9 Remove Programs...11-10 ANAGE EMORY ...11-11 View Memory Status ...11-11 Find Available Memory ...11-12 Voice Commander / ...12-1 TARTING OICE OMMANDER OICE OMMANDER ...12-3...
Page 13: Getting Started
Package Content Pocket PC, stylus, battery, Companion CD, User Guide, AC adapter, USB cable, charger or USB cradle, travel charger, headset and leather case. Pocket PC Stylus User Guide AC Adapter Battery Companion CD USB Cable Charger or USB Cradle Getting Started 1-1...
Page 14: External Views
2 Volume control key 4 Reset button 6 Infrared (IR) port 8 Power button 10 Cell Phone speaker 12 Touch screen M-Desk/Today screen hot key 16 Navigation button. Press the center of the button to set as launch key.
Page 15: Hardware Hotkey Functions
Hardware Hotkey Functions Hardware Short Press Button (Press once and release) Camcorder Zoom in/out during camera mode Adjust volume Voice Commander Reset Button Power Button = open or close screen Enable or disable backlight Power Button + Reset Button = cold boot Frequently Dialed →...
Page 16: Rear Side
Rear Side 1 Insert the SIM card into the SIM card slot with its golden contacts facing down. Follow the picture indicated on the Pocket PC. 3 Main battery 5 Main battery lock Installing the SIM Card Installing the Battery 1.
Page 17: Using The Pocket Pc For The First Time
Using the Pocket PC for the First Time Charging Power and Power Supply USB port: Use the USB cable included with the product package to connect the Pocket PC to the desktop computer through this port. AC adapter power jack. 1.
Page 18 3. Connect the round plug from the AC adapter to the power connector and connect the other AC adapter plug to any household power outlet. The Pocket PC starts to charge automatically. 4. Cold Boot: Press and hold the “Power Button” with one hand, and use the stylus tip to press the “Reset Button”...
Page 19: Configuration Wizard
Configuration Wizard When you use the Pocket PC for the first time or during cold boot, the system will request screen alignment. Tap on the center of the cross (+) continuously and follow the screen instructions to complete the operation. Next, the Configuration Wizard will guide the beginners to continue setting up the phone, button, system and connection items.
Page 20: Travel Charger
Travel Charger Connect the flat end on the USB cable to the charger or USB cradle connector on the bottom of the Pocket PC. Connect the other end of the USB cable to the USB port on the desktop computer. Connect the round plug from the AC adapter to the power connector on the USB cable.
Page 21: Re-Installation Or Replacing The Battery
Re-installation or Replacing the Battery Before you remove the main battery, make sure that the remaining power of the backup battery is over 50 % to prevent data loss. To view the battery power, tap , Settings, the System tab, and then Power. If the phone or GPRS connection function is already activated, deactivate it first and run the next step;...
Page 22: Power On And Off
Power On and Off Sleep Mode 1. Press the “Power Button” at the top of the Pocket PC to enter the Sleep mode. At this time, the screen is turned off and all peripheral devices enter the power-saving mode. But if the phone is turned on, it is still in the call waiting mode.
Page 23: Turn On The Screen
Turn on the Screen This product is designed with a power-saving feature. If the screen is turned off, press the “Power Button” at the top of the Pocket PC to turn it on. If the screen is too dark and you cannot see clearly, set the proper brightness level for the backlight.
Page 24: Restarting The Pocket Pc
Restarting the Pocket PC Reset: Use the stylus to press the “Reset Button” on the side of the Pocket Cold Boot: Press and hold the “Power Button” with one hand, and use the stylus tip to press the “Reset Button” with the other hand. Release the “Power Button”...
Page 25: Using The Pocket Pc
Screen , Settings, the System tab, and then Screen. The first time you use or cold boot the pocket PC, the system will ask you to align the screen. Kindly continue to tap the center of each cross (+) that appears and follow the screen instructions to complete the operation. If you feel that the position is not quite accurate while tapping on the screen, you follow the help for this section to align the screen again.
Page 26: Today Screen
Today Screen When you turn on your Pocket PC for the first time each day (or after 4 hours of inactivity), you will see the “Today screen”. You can also display it by tapping and then Today. On the “Today screen”, you can see at a glance the important information for the day.
Page 27: Using The Pocket Pc
The following table lists the icons that you may see on the Navigation Bar or the Command Bar. Kindly refer to the “Meaning” column for explanation or tap on the icon to access the instant message. Icon (Located on the Navigation Bar at the top of the screen) Speaker is on Speaker is off Main battery is charging.
Page 28: Programs
Programs You can switch from one program to another by selecting it from the menu. (You can customize which programs you see on this menu. For information, see “Adjusting Settings” section.) To access some programs, you’ll need to tap , Programs, and then the program name. Icon Programs Games Group...
Page 29 Icon Programs Pocket Internet Explorer MSN Messenger Pocket Word Pocket Excel Calculator Pictures Windows Media Player File Explorer You can also switch to some programs by pressing a program button. Your Pocket PC has one or more program buttons located on the front or side of the Pocket PC.
Page 30: Navigation Bar And Command Bar
Navigation Bar and Command Bar The navigation bar is located at the top of the screen. It displays the active program and current time, and allows you to switch to programs and close screens. Use the command bar at the bottom of the screen to perform tasks in programs.
Page 31: M-Desk
M-Desk , Programs, Utilities, and then M-Desk. You can categorize programs or even change the background picture on the panel according to your personal preferences. Categorizing, renaming, deleting or editing the text color of program names under M-Desk will not affect the default setting of the Pocket PC.
Page 32 System category screen This category already has 5 programs that are automatically selected by the system which you cannot move or delete. All relevant information is updated automatically. If no SD/MMC card is installed, its icon changes to gray and will be marked with a red X.
Page 33: System Application Programs
System Application Programs , Settings, the Personal tab Program Buttons Set the hot key for Pocket PC hardware button. Input Set the details about the input method. Menus Set the items displaying on the Owner Information Input owner information. Password Set the access rights and password of Pocket PC.
Page 34 , Settings, the System tab Program About Display the important information about the Pocket Backlight Set the details about the backlight and brightness. Certificates For network identification to prevent unauthorized access. Clock & Alarms Set the time and alarms. Memory View the memory usage, and the list of running programs, etc.
Page 35: Enter Information On Your Pocket Pc
Enter Information on Your Pocket PC You have several options for entering new information: 1. Use the input panel to enter typed text, either by using the soft keyboard or other input method. 2. Write directly on the screen. 3. Draw pictures on the screen. 4.
Page 36: Type With The Soft Keyboard
When you use the input panel, your Pocket PC anticipates the word you are typing or writing and displays it above the input panel. When you tap the displayed word, it is inserted into your text at the insertion point. The more you use your Pocket PC, the more words it learns to anticipate.
Page 37: Use Letter Recognizer
Use Letter Recognizer With Letter Recognizer you can write letters using the stylus just as you would on paper. 1. Tap the arrow next to the Input Panel button and then Letter Recognizer. 2. Write a letter in the box. When you write a letter, it is converted to typed text that appears on the screen.
Page 38: Use Transcriber
Use Transcriber With Transcriber you can write anywhere on the screen using the stylus just as you would on paper. Unlike Letter Recognizer and Block Recognizer, you can write a sentence or more of information. Then, pause and let Transcriber change the written characters to typed characters. 1.
Page 39: Write On The Screen
Write on the Screen In any program that accepts writing, such as the Notes program, and in the Notes tab in Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen. Write the way you do on paper. You can edit and format what you’ve written and convert the information to text at a later time.
Page 40: Select Writing
Select Writing If you want to edit or format writing, you must select it first. 1. Tap and hold the stylus next to the text you want to select until the insertion point appears. 2. Without lifting, drag the stylus across the text you want to select. If you accidentally write on the screen, tap Tools, then Undo and try again.
Page 41 If the conversion is incorrect, you can select different words from a list of alternates or return to the original writing. To do so, tap and hold the incorrect word (tap one word at a time). On the pop-up menu, tap Alternates. A menu with a list of alternate words appears.
Page 42: Draw On The Screen
Draw on the Screen You can draw on the screen in the same way that you write on the screen. The difference between writing and drawing on the screen is how you select items and how they can be edited. For example, selected drawings can be resized, while writing cannot.
Page 43: Select A Drawing
Select a Drawing If you want to edit or format a drawing, you must select it first. Tap and hold the stylus on the drawing until the selection handle appears. To select multiple drawings, deselect the Pen button and then drag to select the drawings you want.
Page 44: Create A Recording
Create a Recording 1. Hold your Pocket PC’s microphone near your mouth or other source of sound. 2. Press and hold the Record hardware button on your Pocket PC until you hear a beep. 3. While holding down the Record button, make your recording. 4.
Page 45: Use My Text
Use My Text When using Messaging or MSN Messenger, use My Text to quickly insert preset or frequently used messages into the text entry area. To insert a message, tap My Text and tap a message. You can add text after inserting a My Text message before sending it. To edit a My Text message, in the Tools menu, tap Edit and then tap My Text Messages.
Page 46: Voice Commander
Voice Commander By default, the system sets the button on the side of the Pocket PC as the “Voice Commander Button.” Press this button to launch the Voice Commander. For details on how to use this function, please refer to the Voice Commander section.
Page 47: Using The Phone
The Phone feature on the Pocket PC allows you to perform the following tasks: Make and receive calls. Quickly make calls or listen to voice mail without entering phone numbers using Contacts, Speed Dial, or your Call Log. Check the Call Log to see who has called, whom you have called, add a new number to Contacts, and access notes taken while you were on a call.
Page 48: Installing And Removing The Sim Card
Installing and Removing the SIM Card 1 Insert the SIM card into the SIM card slot with its golden contacts facing down. Follow the picture indicated on the Pocket PC. 3 Main battery 5 Main battery lock Installing the SIM Card Installing the Battery 1.
Page 49 3. To remove the back cover, press the fixing lock button on the rear side of the Pocket PC. 4. Slide it down to unlock the main battery lock and then remove the main battery. 5. Insert the SIM card into the SIM card slot with the golden contacts facing down.
Page 50: Using The Phone
Using the Phone Microphone Earphone Phone Speaker Phone Microphone (Bottom of Pocket PC) Combination Operation Method Hold the Pocket Press Hold the PC and position Pocket PC the speaker close lower part of the Pocket manually to your ear and for calls the microphone close to your lips.
Page 51: Adjusting The Phone Volume
Adjusting the Phone Volume 3. Vibration mode: The speaker icon 4. Mute mode: The speaker icon Here is how to adjust the proper volume: 1. If earphones are used with the Pocket PC to make calls, set the volume according to actual personal needs. 2.
Page 52: Turning The Phone On Or Off And Making Calls
Turning the Phone On or Off and Making Calls 1. Open the Pocket PC back cover and remove the main battery. 2. Install the SIM card properly. As shown in the direction on the Pocket PC, pay attention to the position of the cut corner on the SIM card when you insert it into the card slot.
Page 53 The following table shows the icons that you may see on the Navigation Bar on the top of the screen. Signal Indicator Description The phone is turned off. To turn it on, tap this icon. Network is searching or unavailable. Phone connection unavailable or network error.
Page 54: Toolbar
Toolbar The toolbar at the bottom of the Phone screen provides the Edit Tools. Function Edit Clear: Clears the data in the input area. Paste: If you used Notes, Word or any other program to copy data to the clipboard and the data is a string of numbers, then you can use this function to paste it into the phone input area.
Page 55: Call From Contacts
Call from Contacts Phone numbers entered in Contacts can be used to quickly locate phone numbers and make calls. Call from Speed Dial On the Phone screen, tap Speed Dial Button to enter the following screen. 1. In the contact list, tap and hold the contact.
Page 56: Call From The Call History
Call from the Call History Tap Call History Button on the Phone screen to enter the following screen. 3-10 Tap Show on the top to list the categories. To search, tap By Caller and follow the screen instructions to complete the operation.
Page 57: Customize Your Phone
Customize Your Phone Tap Tools, Options, and then the Phone, Services, Network or Others tabs to modify the relevant service setup. Note that the setup values you can change here depend on the services provided by your telephone company. Sounds and Security Tap Tools, Options, and then the Phone tab.
Page 58: Other Phone Settings
Other Phone Settings Tap Tools, Options, and then the Others tab. 3-12 Auto Answer: While driving, you can set the phone to Auto Answer and use your earphones for calls. Broadcast Channels: If your telephone company provides this service, you can activate it. Band: You can set the band for different regions.
Page 59: Phone Application Programs
Phone Application Programs InCall Recognition , Contacts, and then InCall Recognition. About InCall Recognition You can set a different ring tone, picture and ring type for each contact so that when a contact calls you, the call matches the ring tone and type you set and also displays the picture.
Page 60: Incall Recognition Settings
InCall Recognition Settings You can set the InCall Recognition under Contacts so that each contact has a personalized ring tone and picture. Tap and hold a contact number and wait for the pop-up menu to appear, then tap InCall Recognition to display the following screen.
Page 61: Sim Manager
Before you can use the functions described in the Phone Group. Make sure that the SIM card is properly installed in your Pocket PC and the Phone is already turned on. SIM Manager , Programs, Phone, and then SIM Manager. Standard Display SIM Manager manages the SIM Phonebook and duplicates the Phonebook entries.
Page 62: Full-Screen Display
Here are the functions provided in Show both SIM and Contacts and Show SIM/Contact only: New Button: Add a new phonebook entry to the SIM card. Tools Button: Provides the SIM Manager tools. SMS Button: Enter the SMS management screen. Refresh Button: If there is an update in Contacts, tap this button to display the Contacts and SIM card data again.
Page 63: Sms Management
SMS Management Tap SMS Button to view the original SMS contents in the SIM card. Double tap the number in the L column to view the corresponding SMS contents. Tap the SMS you want to delete. When it is highlighted, tap Delete selected SMS Button to delete this message from the SIM card.
Page 64: Send Sms
Send SMS , Programs, Phone, and then Send SMS. , Messaging, and then New. Press to bring up the Phone screen. Tap Tools and then Send Text Message. Enter the composing SMS screen in Messaging. 3-18 Tap to send SMS message. Input the mobile phone number.
Page 65: Speed Dial
Speed Dial , Programs, Phone, and then Speed Dial. Hot Key Switch Press the hot key on the lower part of the Pocket PC to switch between these functions: Frequently Dialed → Index Dial → Contacts. Figure on the left is the Index Dial screen.
Page 66: Frequently Dialed Screen
Frequently Dialed Screen Frequently Dialed screen Press the hot key on the lower part of the Pocket PC to switch to the Frequently Dialed screen as shown on the left. Tap any phone entry box to speed dial. Tap and hold the box, then select appropriate command from the pop-up menu.
Page 67: Index Dial
Index Dial Index Dial screen Press the hot key on the lower part of the Pocket PC to switch to the Index Dial screen as shown on the left. Tap on any letters. The content displayed are the data created in Contacts.
Page 68: Call Filter
Call Filter , Programs, Phone, and then Call Filter. ～ Synchronize Button: Tap Options and then Synchronize to activate the functions for this button. The system will synchronize the names according to the current Contacts entries but without updating the phone numbers.
Page 69 Add New List Button in the Call Filter screen to enter the screen shown on the left. Input name and telephone number. Add to Block List or Allow List. OK Button Cancel Button Tap and hold a contact in the Contacts screen.
Page 70 The icon screen. 3-24 shows on the lower right of the Today Display Call Filter setting status. Tap to hide the Call Filter Status window. Tap to display the Call Filter Status window.
Page 71: Wireless Modem
Wireless Modem , Programs, Phone, and then Wireless Modem. Using the function provided with this product, you can use the Pocket PC to simulate a Wireless Modem. After connecting successfully to the personal computer (desktop or notebook) through the infrared (IR) or Bluetooth device, you can use the desktop computer to perform tasks, such as connecting to a network, etc.
Page 72 End the ActiveSync connection between the personal computer (desktop or notebook) and the Pocket PC. Under the ActiveSync program on the personal computer, tap File and then Connection Settings. Make sure you did not check “Allow serial cable or infrared connection to this COM port.”...
Page 73 When your Pocket PC is simulating a modem, you can use the personal computer to access a network. , Programs, Phone, and then Wireless Modem to use the Irda function to connect the personal computer to the Pocket Tap Irda Connect Button: Tap to connect.
Page 74: Bluetooth Part
Bluetooth Part 1. Personal Computer side: Refer to the documentation that comes with the Bluetooth USB Dongle you purchased. Insert the Bluetooth device into the USB port on the personal computer. Refer to the documentation on how to install the Bluetooth program in the personal computer and follow the screen instruction to complete the installation.
Page 75 End the ActiveSync connection between the personal computer (desktop or notebook) and the Pocket PC. Under the ActiveSync program on the personal computer, tap File and then Connection Settings. Make sure you did not check “Allow serial cable or infrared connection to this COM port.”...
Page 76 , Programs, Phone, and then Wireless Modem, and select Bluetooth to connect the personal computer to the Pocket PC. When the system finds a compatible Bluetooth port on the personal computer, input the device PIN and follow the screen instructions to complete the operation.
Page 77: Installing Bluetooth Connection Options
Installing Bluetooth Connection Options Refer to the following explanation to set up a virtual modem. 1. Click , Settings, Control Panel, and then Phone and Modem Options. 2. Select the Modems tab and then click Add to add a new virtual modem.
Page 78 3-32 4. Select “Standard 33600 bps Modem,” and then click Next. 5. Select the same COM port you selected earlier using the Bluetooth progam from the Bluetooth USB Dongle, and then click Next. 6. Click Finish. You have set up a virtual modem successfully.
Page 79 Refer to the following explanation to set up properties of the virtual modem. 1. Click , Settings, Control Panel, and then Phone and Modem Options. 2. Select the Modems tab and select the virtual modem you have just set up, and then click Properties.
Page 80 Refer to the following explanation to establish a new connection. 3-34 1. Click , Settings, Control Panel, Network and Dial-up Connections, and then Make New Connection. 2. Click Next. 3. Select “Dial-up to the Internet,” and then click Next. 4. Select “I want to set up my Internet connection manually, or I want to connect through a local...
Page 81 5. Select “I connect through a phone line and a modem,” and then click Next. 6. Do not check “Use area code and dialing rules”. Input *99#” in the Telephone Number field and click Next. 7. Input your Internet account user name and password.
Page 82 MyConnt 3-36 8. Input any name you want to use and click Next. 9. Select No and click Next. 10. Click Finish. You have established a new connection successfully.
Page 83 Refer to the following explanation to set up properties of the new connection. MyConnt 1. Click , Settings, Control Panel, and then Network and Dial-up Connections. 2. Look for the new connection you just established and click the right mouse button. Select Properties from the pop-up menu.
Page 84 3-38 4. Do not check the following items: Enable hardware flow control Enable modem error control Enable modem compression Enable modem speaker Finally click OK to save. 5. Select the Networking tab and confirm that you have selected “Internet Protocol (TCP/IP),”...
Page 85 7. Do not check “Use IP Header compression.” 8. Finally, click OK. You have finished setting up all properties for this new connection. Now you can exit Network and Dial-up Connections. Using the Phone 3-39...
Page 86 3-40...
Page 87: Customize Your Pocket Pc
You can adjust the Pocket PC settings according to your personal preferences and install other programs. Adjusting Settings To see available options, tap System tab located at the bottom of the screen. The following utilities allow you to adjust the settings based on your personal work style. Clock &...
Page 88: Notifications
Notifications Your Pocket PC reminds you in a variety of ways when you have something to do. For example, if you’ve set up an appointment in Calendar, a task with a due date in Tasks, or an alarm in Clock & Alarms, you’ll be notified in any of the following ways: A message box appears on the screen.
Page 89: Power Preference Settings
Power Preference Settings 1. Tap and then Power to view the power usage condition or perform the relevant power management settings. 2. Wireless tab: Activate or deactivate the wireless communication function.of the Pocket PC. 3. Advanced tab: Set the Pocket PC to turn off automatically after a period of inactivity.
Page 90: Backlight
Backlight Microphone , Settings, the System tab, and then Microphone. 1. Tap , Settings, the System tab, and then Backlight to set the relevant backlight functions. 2. Backlight Level tab: Adjust the backlight level. Tap the slider marks to adjust volume of the phone mic or recording mic.
Page 91: Adjust Volume
Adjust Volume Push the volume control key on the side of the Pocket PC. Or use the stylus to tap the icon on the top of the screen to adjust all program sound functions under . Adjust the phone volume under 1.
Page 92: Scenarios
Scenarios , Settings, the System tab, and then Scenarios. You can tap any Scenarios icon in the Today screen to enter Scenarios. After selecting a mode, this will become the Scenarios icon you selected. Check this item to activate Scenarios. Select an applicable mode.
Page 93: Quick Link
Quick Link , Settings, the Personal tab, Today, the Items tab, and then check Quick Link. You can select a maximum of 27 icons. Items not supported by the system will not display. Items tab: Enter the Today setting screen with Quick Link Options. Make sure that Quick Link is checked so that the Today screen can display this item.
Page 94 Tap the Advanced tab to enter the screen shown on the left. Set to enable or disable the use of the Big Icon. Tap on arrowhead to select the number of lines for displaying Quick Link. The icons of the programs you checked in the General tab are displayed in this area.
Page 95: Find And Organize Information
Find and Organize Information The Find feature on your Pocket PC helps you quickly locate information. Actually, you can use File Explorer to search for files and place these files into folders systematically. Just tap Explorer. You can move files in File Explorer by tapping and holding the item you want to move, and then tapping Cut or Copy and Paste on the pop-up menu.
Page 96: Pop-Up Menus
Pop-up menus With pop-up menus, you can quickly choose an action for an item. For example, you can use the pop-up menu in the contact list to quickly delete a contact, make a copy of a contact, or send an e-mail message to a contact. The actions in the pop-up menus vary from program to program.
Page 97: Redefine Hot Keys
Redefine Hot Keys , Settings, the Personal tab, and then Buttons. These hot keys can be redefined as launch keys for frequently used programs. End Button and Send Button are exclusive phone functions so they cannot be redefined. Customize Your Pocket PC 4-11...
Page 98 4-12...
Page 99: Microsoft Activesync
 Using Microsoft ActiveSync your desktop computer with the information on your device. Synchronization compares the data on your device with your desktop computer and updates both computers with the most recent information. For example: Keep Pocket Outlook data up-to-date by synchronizing your Pocket PC with Microsoft Outlook data on your desktop computer.
Page 100: Installing And Using Activesync
Installing and Using ActiveSync Important Installation Notice Before you install ActiveSync, make sure that the USB cable on the Pocket PC is not connected to the personal computer. Connect the USB cradle only after ActiveSync is installed. 1. Installing ActiveSync: Use the Companion CD to install Microsoft ActiveSync on the personal computer.
Page 101: Usb Synchronization
3. Using ActiveSync After installation is complete, the ActiveSync Setup Wizard helps you customize your synchronization settings. Once you use the USB cradle to connect the two devices properly, the Set Up a Partnership screen appears on the personal computer. Set it up according to your requirements.
Page 102 ActiveSync synchronization settings: 1. After installation is complete, the Setup Wizard will continue to guide you. Adjust the specifications according to your actual needs. 2. Use the USB cradle to connect the two devices properly and the Set Up a Partnership screen appears on the personal computer.
Page 103 Check the items you want to synchronize. Click Next. Click Finish. Select the type you want to synchronize. Click OK. Microsoft ActiveSync 5-5...
Page 104 After installation is complete, the ActiveSync Setup Wizard helps you connect your Pocket PC to your desktop computer, set up a partnership so you can synchronize information between your Pocket PC and your desktop computer, and customize your synchronization settings. Your first synchronization process will automatically begin when you finish using the wizard.
Page 105: Synchronizing Using Infrared Or Bluetooth
Synchronizing using Infrared or Bluetooth Without using the USB cradle to connect the two devices, you can tap , ActiveSync, and then Tools on the Pocket PC and still synchronize using infrared or Bluetooth with the Sync Button advantage is that you don’t have to plug in and detach from the USB cradle so often.
Page 107: Connections
Connecting to the Internet This section teaches you how to use GPRS wireless network connection. GPRS wireless networking is a convenient function for working at home or while traveling. You can use the Pocket PC to browse websites and read or send E-mails, SMS or MSN messages.
Page 108: Setting The Gprs Connection
Setting the GPRS Connection , Settings, the Connections tab, Connections, and then the Tasks tab. 1. As shown in the screen on the left tap “Add a new modem connection” below “My ISP.” 2. Enter the “Make New Connection” screen as shown in the screen on the left.
Page 109 3. Input the Access Point Name provided by your telecom company and tap Next. 4. Input your personal information such as account number, and tap Finish. Connections 6-3...
Page 110: Starting Gprs Connection
Starting GPRS Connection Disconnecting GPRS 1. Tap the icon at the top of the screen and when a message window appears tap “Turn off flight mode” and input your PIN to turn on the Phone. The icon will change to while the icon changes to 2.
Page 111: Infrared Connection
Infrared Connection This section explains how to transmit data between this Pocket PC and other infrared devices. If you have friends who have also bought this Pocket PC or other Pocket PCs or notebooks with an infrared device, then you can exchange information anytime, anywhere.
Page 112 3. If the other device is an older model, your Pocket PC may not be able to detect it. Tap “Receive an infrared beam,” on the lower left side of the screen shown on the step 2. Follow the screen instructions. 4.
Page 113: Csd Type
CSD Type , Settings, the Connections tab, and then CSD Type. You must first apply for Circuit-Switched Data (CSD) service from your telecom company before you can use this function. In short, this function is similar to the modem dial-up in a personal computer. By simulating the Pocket PC as a modem and connecting through the built-in GSM device, you can use the Pocket PC to access the web.
Page 114: Connecting With A Personal Computer
Connecting with a Personal Computer For more information, refer to “Microsoft ActiveSync” section. Bluetooth Wireless Transmission Tap the icon on the lower right corner of the Today screen to enter the Bluetooth Manager screen. For more information, refer to “Using Bluetooth”...
Page 115: Sending And Receiving Messages
E-mails and SMS Messages Refer to “Connecting to the Internet” section to learn how to connect the Pocket PC to the Internet and start using Messaging to send and receive E-mails and SMS messages. This section explains the basic preparations and processing principles. If you have any questions, refer to online help about Pocket PC or ActiveSync.
Page 116: Synchronizing E-Mail Messages
Synchronizing E-mail Messages If you want to synchronize e-mails with company or home usage, please refer to this section. E-mail messages can be synchronized as part of the general synchronization process. You will need to enable Inbox synchronization in ActiveSync. For information on enabling Inbox synchronization, see ActiveSync Help on the desktop computer.
Page 117: Connecting Directly To The Mail Server
Connecting Directly to the Mail Server For single-machine use, not combining office and home E-mails, please refer to “E-mail Server Setup” section. You will receive messages directly from the mail server. This is irrelevant to personal computer use. You can work online or offline. When working online, you read and respond to messages while connected to the e-mail server.
Page 118: E-Mail Server Setup
E-mail Server Setup Refer to this section if you are preparing for single-machine use and not combining office and home E-mails. If you already have an E-mail account from your ISP or company network, you can use Messaging to send and receive mails and messages.
Page 119: Using E-Mails And Sms
Using E-mails and SMS Below is a brief description of the Messaging screen functions: Select the service and folder you want to display. Select the sort order for messages. Tap to open a message. Tap and hold to display a pop-up menu of actions.
Page 120 Brief description on writing, sending, reading and replying (to) mail: 1. Send and Receive Mail: Tap New to compose a message. Tap Send to send it. When you return to the Messaging screen, tap Mail Button to send it out. Tap To, Cc or Bcc to open the Contacts screen.
Page 121 2. Read and Reply: Receive new mails by tapping Button. Switch to the “Inbox” folder and tap to open. The following figure shows the open mail screen. 3. Change preference settings. Set the Inbox Synchronization option under ActiveSync. Tap Messaging, Tools, Options, and then the Accounts, Message…tabs on the Pocket PC to set the appropriate options.
Page 122: Msn Messenger
MSN Messenger To switch to MSN Messenger, tap  Messenger. MSN Messenger on your Pocket PC is an instant messaging program that lets you: See who is online. Send and receive instant messages. Have instant message conversations with groups of contacts. For more information on using MSN Messenger, tap Help.
Page 123: Working With Contacts
If you already use MSN Messenger on your desktop computer, your contacts will show up on your Pocket PC without being added again. Working with Contacts The MSN Messenger window shows all of your messenger contacts at a glance, divided into Online and Not Online categories. From this view, while connected, you can chat, send an e-mail, block the contact from chatting with you, or delete contacts from your list using the pop-up menu.
Page 124: Chatting With Contacts
To see others online without being seen, in the Tools menu, tap My Status and select Appear Offline. If you block a contact, you will appear offline but will remain on the blocked contact’s list. To unblock a contact, tap and hold the contact, then tap Unblock on the pop-up menu.
Page 125: Mms Composer
MMS Composer , Programs, Phone, and then MMS Composer. The MMS Composer mailbox is very similar to ordinary E-mail mailbox function. “Inbox” saves the MMS that you received while “Outbox” saves the MMS that you are going to send. “Sent” saves a backup copy of the MMS sent successfully.
Page 126: Create And Edit Mms
Create and Edit MMS How to add a new MMS: 1. Tap New, the Edit area displays a MMS template that you can edit freely. 7-12 4. Preferences tab: For “Connect Via,” select the same connection method (such as My ISP) as you set in Connections.
Page 127 2. Tap specified areas to insert the desired picture, text and audio files. Tap the text dialog area, edit MMS text and then just tap How to use Canned Text: Tap phrases. In addition, if you tap and hold the canned text, then tap New on the pop-up menu, you can create your own canned text.
Page 128 3. Tap the specified area to select the audio file required by the MMS. 4. You can create one or more slides, add several slides in the same MMS and edit anytime. 7-14 Select the folder types you want to display in the list.
Page 129: Sending Messages
Sending Messages You can tap Send Button directly to send an MMS message or you can send an MMS message by tapping Tools and then Send Message. You can input a special subject for your MMS and send it to the mobile phones or mailboxes of your friends and family.
Page 130 7-16...
Page 131: Using Bluetooth
Bluetooth Wireless Transmission Bluetooth is a short-distance wireless communication technology with an effective range under 10 meters (30 feet). When you turn on the power for Bluetooth, the indicator flashes blue. Bluetooth LED indicator Bluetooth Connection Setting Before you use the Bluetooth function, turn on its power. 1.
Page 132: Pair
3. Connections (Bluetooth connection mode) ON (connect to other devices): The Bluetooth connection is on. Your Pocket PC can transmit data to other devices but other devices cannot detect your Pocket PC. DISCOVERABLE (allow other devices to connect): The Bluetooth connection is on.
Page 133: Serial Port
Serial Port If you have Bluetooth GPS software, use the product as instructed and refer to the accompanied documentation and this section to register your Pocket PC as an effective serial port or search for other serial ports. Register new serial port 1.
Page 134: Bluetooth Headset
Bluetooth Headset 1. Check “Use Bluetooth Headset.” 2. Tap Select Headset to enter the setting Tap Bluetooth Manager, the Headset screen.
Page 135: Multimedia
Using Camera , Programs, Multimedia, and then Camera. 1. To take photos of scenery or of other people, turn the Pocket PC so the screen is facing you and when you are satisfied with the composition, press the button on the side of the Pocket PC. 2.
Page 136: Camera Mode
Camera Mode You can use Camera to shoot pictures and videos. This section describes the Camera tools. Icon Photo mode: Normal, Timer, Continuous shutter, Portrait Activate “Timer” to select the fixed time for shooting a picture Activate “Continuous shutter” to select the number of pictures to be taken Choose landscape or portrait Enable or disable the flash function...
Page 137: Camera Mode Using Wizard
Camera Mode Using Wizard to select Wizard. After you press the shutter button on the side of the Pocket PC, the Wizard will guide you through how to link to other programs conveniently. This section explains the Wizard tools. Icon Delete current picture Return to Camera to continue taking pictures Connect to Messaging...
Page 138: Managing Pictures Shot By Continuous Shutter
Managing Pictures Shot by Continuous Shutter to select “Continuous shutter” in the wizard mode. After you press the shutter button, you can preview all thumbnails just shot and delete the unnecessary one. Exit Camera Tap the thumbnail that you want to delete on the toolbar to delete the unnecessary picture...
Page 139: Digital Video Mode
Digital Video Mode Recording without entering the Camera screen: Directly press and hold Recorder Button for a few seconds and then release to start recording. To finish recording, press the Recorder Button to stop. , Programs, Multimedia, and then Camera, DV Mode. 1.
Page 140: Digital Video Mode Using Wizard
Digital Video Mode Using Wizard to select Wizard. After you finish recording, the Wizard will guide you through how to link to other programs conveniently. This section explains the Wizard tools. Icon Delete current video Return to Camera and continue shooting videos Connect to Messaging Connect to Multimedia Manager Exit Camera...
Page 141: Speed Shooting Using The Hardware Hotkeys
Speed Shooting Using the Hardware Hotkeys Capture Mode Camera Shutter/Video Recorder Switch between Camera and Video Recording modes Open or close the toolbar Setting Mode/Wizard Mode Use the Navigation Button to navigate up, down, left and right to select from the icons on the screen. Press the middle button to execute selection.
Page 142: Multimedia Manager
Multimedia Manager , Programs, Multimedia, and then Multimedia Manager. You can use Multimedia Manager to manage and view multimedia information such as pictures, music, videos, etc. Preview Multimedia Information Tap and hold the thumbnail and when the pop-up menu appears, select the desired functions.
Page 143: Slideshow Function
SlideShow Function Tap Multimedia Manager, View, and then SlideShow. Double tap anywhere on the screen to exit the slideshow. Playing the last picture while not in the slide show looping mode, tap the screen and then tap the icon to exit the slideshow. Refer to the method described above to exit the slideshow and enter the screen shown on the left.
Page 144: Multimedia Manager Tools
Multimedia Manager Tools 9-10 Tap Multimedia Manager, Tools, and then Setting. Slideshow tab: As shown on the left, this is the settings of the slideshow mode. Association tab: Select the desired file type you want to open with Multimedia Manager. File Browse tab: Set the browsing method.
Page 145: Image Maker
Image Maker , Programs, Multimedia, and then Image Maker. Image Maker is used to create, edit and view pictures. Use it to view and edit the pictures you take. You can also use the relevant Image Maker commands and tools such as rotate, stretch, brightness, etc. to edit and process the graphics.
Page 146 Icon Meaning of the Drawing Tool Box Select foreground and background colors Eraser Pick color Pencil for writing and drawing lines Airbrush Line Curve Rectangle Ellipse Polygon Rounded rectangle Text Select Fill with color Magnifier Brush Icon Meaning of the Drawing Toolbar New document Open Save...
Page 147: Image Wizard
Image Wizard , Programs, Multimedia, and then Image Wizard. Image Wizard provides frames, icons, filters and simple drawing tools that you can use to process photos and pictures. Wizard will guide you to complete the process step-by-step. You can then choose to save the file or send it through E-mail or MMS Composer.
Page 148 9-14...
Page 149: Companion Programs
 Microsoft Pocket Outlook includes Calendar, Contacts, Tasks, Messaging, and Notes. You can use these programs individually or together. For example, e-mail addresses stored in Contacts can be used to address e-mail messages in Messaging.  Using ActiveSync , you can synchronize information in Microsoft Outlook or Microsoft Exchange on your desktop computer with your Pocket PC.
Page 150: Calendar : Scheduling Appointments And Meetings
Calendar: Scheduling Appointments and Meetings Use Calendar to schedule appointments, including meetings and other events. You can check your appointments in one of several views (Agenda, Day, Week, Month, and Year) and easily switch views by using the View menu. You can customize the Calendar display, such as changing the first day of the week, by tapping Options on the Tools menu.
Page 151: Create An Appointment
Create an Appointment 1. If you are in Day or Week view, tap the desired date and time for the appointment. 2. Tap New. 3. Using the input panel, enter a description and a location. Tap first to select the field. 4.
Page 152: Use The Summary Screen
Use the Summary Screen When you tap an appointment in Calendar, a summary screen is displayed. To change the appointment, tap Edit. Create Meeting Requests You can use Calendar to set up meetings with users of Outlook or Pocket Outlook. The meeting request will be created automatically and sent either when you synchronize Inbox or when you connect to your e-mail server.
Page 153: Schedule A Meeting
Schedule a Meeting 1. Create an appointment. 2. In the appointment details, hide the input panel, and then tap Attendees. 3. From the list of e-mail addresses you’ve entered in Contacts, select the meeting attendees. The meeting notice is created automatically and placed in the Outbox folder.
Page 154: Contacts: Tracking Friends And Colleagues
Contacts: Tracking Friends and Colleagues Contacts maintains a list of your friends and colleagues so that you can easily find the information you’re looking for, whether you’re at home or on the road. Using the Pocket PC infrared (IR) port, you can quickly share Contacts information with other Pocket PC users.
Page 155: Find A Contact
4. To add notes, tap the Notes tab. You can enter text, draw, or create a recording. For more information on creating notes, see “Notes: Capturing Thoughts and Ideas” section. 5. When finished, tap to return to the contact list. Find a Contact There are four ways to find a contact: In the contact list, enter a contact name in the box under the navigation bar.
Page 156: Use The Summary Screen
Use the Summary Screen When you tap a contact in the contact list, a summary screen is displayed. To change the contact information, tap Edit. 10-8 View contact details. Tap to view notes. Tap to change contact information.
Page 157: Task: Keeping A To Do List
Tasks: Keeping a To Do List Use Tasks to keep track of what you have to do. To change the way information is displayed in the list, tap Tools and then Options. Select the category of tasks you want displayed in the list. Select the sort order of the list.
Page 158: Create A Task
Create a Task 1. Tap New. 2. Using the input panel, enter a description. 3. You can enter a start date and due date or enter other information by first tapping the field. If the input panel is open, you will need to hide it to see all available fields.
Page 159: Use The Summary Screen
Use the Summary Screen When you tap a task in the task list, a summary screen is displayed. To change the task, tap Edit. Voice Recording Format View task details. Tap to show and hide additional summary information. View notes. Tap to change task.
Page 160: Notes: Capturing Thoughts And Ideas
Notes: Capturing Thoughts and Ideas Quickly capture thoughts, reminders, ideas, drawings, and phone numbers with Notes. You can create a written note or a recording. You can also include a recording in a note. If a note is open when you create the recording, it will be included in the note as an icon.
Page 161: Create A Note
Create a Note 1. Tap New. 2. Create your note by writing, drawing, typing, and recording. For more information about using the input panel, writing and drawing on the screen, and creating recordings, see “Enter Information on Your Pocket PC.” Tap to return to the note list (the note is saved automatically).
Page 162: Pocket Word
Pocket Word Pocket Word works with Microsoft Word on your desktop computer to give you easy access to copies of your documents. You can create new documents on your Pocket PC, or you can copy documents from your desktop computer to your Pocket PC. Synchronize documents between your desktop computer and your Pocket PC so that you have the most up-to-date content in both locations.
Page 163 You can change the zoom magnification by tapping View and then Zoom. Then select the percentage you want. Select a higher percentage to enter text and a lower one to see more of your document. If you’re opening a Word document created on a desktop computer, select Wrap to Window on the View menu so that you can see the entire document.
Page 164: Typing Mode
Typing Mode Tap View and then Typing. Using the input panel, enter typed text into the document. For more information on entering typed text, see “Enter Information on Your Pocket PC.” To format existing text and to edit text, first select the text. You can select text as you do in a Word document, using your stylus instead of the mouse to drag through the text you want to select.
Page 165: Writing Mode
Writing Mode Tap View and then Writing. In writing mode, use your stylus to write directly on the screen. Ruled lines are displayed as a guide, and the zoom magnification is greater than in typing mode to allow you to write more easily.
Page 166: Drawing Mode
Drawing Mode Tap View and then Drawing. In drawing mode, use your stylus to draw on the screen. Gridlines appear as a guide. When you lift your stylus off the screen after the first stroke, you’ll see a drawing box indicating the boundaries of the drawing.
Page 167: Pocket Excel
Pocket Excel Pocket Excel works with Microsoft Excel on your desktop computer to give you easy access to copies of your workbooks. You can create new workbooks on your Pocket PC, or you can copy workbooks from your desktop computer to your Pocket PC. Synchronize workbooks between your desktop computer and your Pocket PC so that you have the most up-to-date content in both locations.
Page 168: Tips For Working In Pocket Excel
Tips for Working in Pocket Excel For more information on using Pocket Excel, tap Note the following when working in large worksheets in Pocket Excel: View in full-screen mode to see as much of your worksheet as possible. Tap View and then Full Screen. To exit full-screen mode, tap Restore. Show and hide window elements.
Page 169: Window Media Player
Windows Media Player Use Microsoft Windows Media Player for Pocket PC to play digital audio and video files that are stored on your Pocket PC or on a network. To switch to Windows Media Player for Pocket PC, tap then tap Windows Media. , Programs, and Use full-screen to view video.
Page 170 Use Microsoft Windows Media Player on your desktop computer to copy digital audio and video files to your Pocket PC. You can play Windows Media and MP3 files on your Pocket PC. For more information about using Windows Media Player for Pocket PC, tap , and then tap Help.
Page 171: Pocket Ie
Pocket IE Using Pocket IE  Use Microsoft Pocket Internet Explorer to view Web or WAP pages in either of these ways: During synchronization with your desktop computer, download your favorite links and mobile favorites that are stored in the Mobile Favorites subfolder in Internet Explorer on the desktop computer.
Page 172: Browse The Internet
Browse the Internet Refer to “Connecting to the Internet” section to connect the Pocket PC to the Internet and start browsing websites. 1. Tap and then Internet Explorer. 2. Tap View and then Address Bar. Input the site address into the address box at the top of the screen and connect to this site.
Page 173: View Mobile Favorites And Channels
View Mobile Favorites and Channels 1. Tap the Favorites button to display your list of favorites. 2. Tap the page you want to view. You’ll see the page that was downloaded the last time you synchronized with your desktop computer. If the page is not on your Pocket PC, the favorite will be dimmed.
Page 174: Favorite Links
Favorite Links During synchronization, the list of favorite links in the Mobile Favorites folder on your desktop computer is synchronized with Pocket Internet Explorer on your Pocket PC. Both computers are updated with changes made to either list each time you synchronize. Unless you mark the favorite link as a mobile favorite, only the link will be downloaded to your Pocket PC, and you will need to connect to your ISP or network to view the content.
Page 175: Save Pocket Pc Memory
5. If you want to download the pages that are linked to the mobile favorite you just created, in Internet Explorer on the desktop computer, right-click the mobile favorite and then click Properties. In the Download tab, specify the number of links deep you want to download. To conserve Pocket PC memory, go only one level deep.
Page 176 10-28...
Page 177: Maintaining The Pocket Pc
Backup Utility , Programs, Utilities, and then Backup Utility. Backup Utility is used to back up or restore files saved in the Pocket Storage Space When making backups, you can choose the following storage spaces: 1. My Documents: Data saved here will disappear when you perform a cold boot.
Page 178: Backup Files
Backup Files Wizard Mode Standard Mode For example, backup your personal data to the FlashDisk folder. Use the similar method to backup data to other storage spaces. 11-2 Tap Backup. Next Button and the Wizard will guide through the steps that follow.
Page 179: Advanced Settings Options
Advanced Settings Options Under the Backup Files screen, tap Advanced settings screen as shown below. Advanced Button to enter the Check the options as required. If you check this option, the Wizard will guide you through the steps to complete the operation the next time you open Backup Utility.
Page 180 If you checked “Auto backup on schedule,” tap to enter the screen shown on the left. Backup frequency. Tap the date button on the right of “Starting” to set the starting date. Tap the time button on the right of “Starting”...
Page 181: Restore Files
Restore Files 1. When restoring files, the system will delete all current data in the Pocket PC and replace it with the backup files. 2. To make sure that files can be restored successfully, do not use the Pocket PC while performing restore. 3.
Page 182: Standard Mode
Standard Mode For example, to restore the backup personal data from the FlashDisk folder. Use the similar method to restore data from other storage spaces. System Information , Settings, the System tab, and then System Information. 11-6 Tap the Restore tab. Select “Latest”...
Page 183: Adding Or Removing Programs
Adding or Removing Programs Programs added to your Pocket PC at the factory are stored in ROM (read-only memory). You cannot remove this software, and you’ll never accidentally lose ROM contents. All other programs and data files added to your Pocket PC after factory installation are stored in RAM (random access memory).
Page 184: Add A Program Directly From The Internet
5. Double-click the *.exe file. If the file is an installer, the installation wizard will begin. Follow the directions on the screen. Once the software has been installed on your desktop computer, the installer will automatically transfer the software to your Pocket PC.
Page 185: Add A Program To The Start Menu
Add a Program to the Start Menu , Settings, the Personal tab, Menus, and then Start Menu tab. If you do not see the program listed, you can either use File Explorer on the Pocket PC to move the program to the Start Menu folder, or use ActiveSync on the desktop computer to create a shortcut to the program and place the shortcut in the Start Menu folder.
Page 186: Remove Programs
Using ActiveSync on the desktop computer: Use the Explorer in ActiveSync to explore your Pocket PC files and locate the program. Right-click the program, and then click Create Shortcut. Move the shortcut to the Start Menu folder in the Windows folder. The shortcut now appears on the menu.
Page 187: Manage Memory
Manage Memory View Memory Status , Settings, the System tab, and then Memory. Tap the Main tab. Memory is managed automatically by Pocket PC. Move slider to temporarily adjust the memory allocation ratio between Storage and Program. Current memory status. Find: Quick link to the Find program.
Page 188: Find Available Memory
Find Available Memory Under certain circumstances such as insufficient memory, the Pocket PC cannot allocate memory automatically. Try to solve this problem through the following methods: , Programs, and then Find. 11-12 Tap the Running Programs tab. Tap a program name in ”Running Programs List”...
Page 189 1. Tap , Programs, and then File Explorer. Use File Explorer to move the files you want to keep to external storage cards such as SD or MMC. Tap and hold the items to be moved, then tap Cut or Copy on the pop-up menu.
Page 190 , Programs, Notes/Pocket Word/Pocket Excel, and then Tools, Options. In addition, you can use the Rename/Move or Save As function provided by the program above to move or save files to the storage card. 11-14 1. Enter the Notes file list screen. 2.
Page 191: Voice Commander
, Programs and then Voice Commander. Voice Commander is continuous voice recognition application software in the Pocket PC. Voice Commander allows the user to use their own voice to dial and control functions. Voice Commander has the following features: Fully voice-controlled system that allows the user to complete operations (such as dialing phone or running applications) quickly without using hands.
Page 192: Starting Voice Commander
Starting Voice Commander , Programs, and then Voice Commander. Program Voice Commander Run the voice dialing, find and start applications. Voice Commander Edit the content of the voice commands and personal Setting digital adapted model recognizable by Voice Commander in order to increase recognition in digital dialing.
Page 193: Voice Commander
Voice Commander Press the Voice Commander Button on the Pocket PC and enter the Voice Commander screen. Voice Name dialing Usage: Call <Contact> at <Home/Work/Mobile> Example 1: Call Jennifer Lopez Example 2: Call Jennifer Lopez at mobile Voice Show Contact Usage: Show <Contact>...
Page 194 All the names in Contacts will automatically become recognizable contacts in the “Voice dialing” syntax. However, if the number of contacts exceeds 1000 entries, the system will not recognize the excessive entries. To add these entries to Voice Commander for recognition, tap Menu and then Setting or run Voice Commander Setting to check and add these contacts manually for voice recognition.
Page 195: Voice Commander Setting
Voice Commander Setting There are two ways to run Voice Commander Setting: , Programs, Voice Commander, and then Voice Commander Setting. Tap Menu and then Setting while using Voice Commander. Voice Commander Setting allows the user to personalize the Voice Commander settings, add and remove contacts or applications within the recognition range, record voice tags or play commands to prompt the user on how to say the correct command.
Page 196 Play Button: Play the recorded voice tag for this contact and hear how it is pronounced. Build Button: Record the voice tag for this contact again. Delete Button: Delete the voice tag for this contact. Contacts tab: Sets the voice commands for Contacts. Application tab: Sets the voice commands for applications.
Page 197 You can choose which Contacts are to be added to the recognizable range of the Voice Commander. By default, the system automatically adds all names within the recognizable range. If the number of Contacts exceeds 1000 entries, the system will not recognize the excessive entries.
Page 198: Application Settings Page
Application Settings Page Tap Voice Commander Setting and then the Application tab and the Settings page will list the applications and settings installed by the Pocket PC and then Programs (whether or not it is selected, with or without voice tag). You can choose which applications are to be added to the recognizable range of the Voice Commander.
Page 199 Application example: You want to record MSN Messenger as “Chat room.” 1. Tap MSN Messenger. 2. Tap Build Button. 3. When you hear a beep, say the words “Chat room” that you want to record. 4. When you hear a second beep, say “Chat room” again. 5.
Page 200: Digit Training Settings Page
Digit Training Settings Page Tap Voice Commander Setting and then the Digit Training tab. This function trains a set of personal voice model to increase accuracy in recognition for users with heavier accents. There are 10 sets of built-in 6-digit numbers that you have to recite. The steps are as follows: 1.
Page 201: Faq
As long as you have completed recording, then you can check “Use adapted model” to use the personal model tailored made for you. It is recommended that you recite all 10 sets of numbers so the adaptation effect is more obvious. If you do not want to use the adapted model, then just uncheck “Use adapted model.”...
Page 202 Question: I added a new contact but it is not recognized. Answer: 1. The system only recognizes English words and characters or digits. Any symbols or marks will be ignored. However you can still make a voice tag for these items. 2.
Page 203: Specifications
Item ® Operating Microsoft Windows Mobile™ 2003 Second Edition system for Pocket PC Phone Edition Processor Samsung S3C 2440, 400 MHz Memory 128 MB Flash ROM, 64 MB SDRAM Display TFT w/Touch panel, 2.8 inches, 240 x 320 resolution, 64K colors Communication GSM Quad band 850/900/1800/1900 MHz GPRS Class B, Multi-slot 10...
Page 204 13-2...
Page 205: Regulation Notice And Safety Declaration
SAR Information Read this manual carefully before using. Warning: Reduced electromagnetic waves, please use properly. SAR standard value: 1.6 mW/g Actual test value: 0.24 mW/g Health and Safety Information Electrical and Battery Safety ♥ Use only the AC adapter provided with this product. Do not use similar items from other products.
Page 206 Application Environment Safety ♥ Do not directly expose the Pocket PC to any of the following environments: rapid changes of temperature, high temperature (such as direct exposure to sunlight or stoves), extremely low temperature, high pressure, areas with electrostatic discharge interference or dusty and humid places.
Page 207: Faq
1. My Pocket PC cannot boot. What should I do about it? Answer: Make sure the Pocket PC battery you use still has enough power. Plug your Pocket PC into the charger cradle, and make sure the red charging indicator lights up. Press the “Power Button.” If you have done the above but your Pocket PC still cannot boot, proceed with the following step: Remove the Pocket PC back cover, and check the battery lock is in place.
Page 208 3. Why doesn’t my Pocket PC make any sound? Answer: Tap the speaker icon on the top right of the screen, then select the volume control options, or adjust the volume of the incoming call sound. Alternatively, you may use the volume control key on the side of your Pocket PC by pushing it up or down to control the volume.
Page 209 6. The characters on the screen are too small to read. How can I enlarge them? Answer: Tap , Settings, the System tab, Screen, and then the Text size tab. You may adjust the text size as you wish. Also, you may select the landscape orientation in the General tab screen.
Page 210 First Version: March 2005 Current Version: March 2005, Version 1 Number: 20050220 15-4...

ETen M500 User Manual

Getting Started

Using the Pocket PC

Using the Phone

Customize Your Pocket PC

Microsoft Activesync

Connections

Sending and Receiving Messages

Using Bluetooth

Multimedia

Quick Links

Need help?

Questions and answers

Related Manuals for ETen M500

Summary of Contents for ETen M500