Setting The Signal; Cleaning And Maintenance; Machine Housing/Control Panel - Bosch WAE28369GB Series Instruction Manual And Installation Instructions

Setting the signal

en
M
Setting the signal
i n g S e t t
1. Activate the setting mode for the signal volume
Set to Ú
2. Set the volume for the button signals and information signals (depending on the model)
* you may need to
select the function sev-
eral times.
2
Cleaning and
maintenance
n g C l e a n i
:
Warning
Risk of death!
There is a risk of electric shock if you
touch live components.
Switch off the appliance and unplug the
mains plug.
:
Warning
Risk of poisoning!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
20
t h e
One step, the display
panel lights up
Set the vol- skip
ume*
a n d
s i g n a l
Select and hold
One step Set the volume*
Caution!
Damage to the appliance
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
e n a n c e m a i n t
surfaces and components in the
machine.
Do not use cleaning agents that contain
solvents.
Machine housing/control
panel
Wipe the housing and the control
■
panel with a soft, damp cloth.
Do not use any abrasive cloths,
■
scourers or cleaning agents
(stainless steel cleaners).
Remove the detergent residue
■
immediately.
One step, release
Set to Ú