Plantronics CS50 Quick Start User Manual page 2

E
BASE & CHARGING UNIT
Charge Cradle
1
Talk
2
Indicator
(Green)
Power
3
Indicator
(Red)
4
Telephone
Configuration
Dial
Front View
Speak
12
Volume
11
Master
Handset
8
Jack
AC Power
7
Adapter
Jack
Accessory
6
Jack
Telephone
5
Underside View
Base Jack
1 Set Up the Base
1.1 Connect your telephone's
handset cord to the handset
jack.
1.2 Connect your telephone
with the supplied short cord
to the telephone base jack.
1.3 Connect the supplied AC power
adapter to the AC power adapter jack
and the plug into your power source.
The red power indicator light
3
should go on.
1.4 *Optional: Install the
optional handset lifter after
you have completed Step 5.
Use the handset lifter instructions
to install it. More information on
using the handset lifter with your CS50
system is located in the online Product
Information Booklet.
3
Set Up the Headset
For over-the-head use
3.1 Determine right or left
ear wearing position and
snap the headset speaker
capsule into the t-pad headset
20
retainer ring.
3.2 While wearing the headset, adjust
the microphone tip toward the corner
of your mouth by rotating the speaker
capsule within the t-pad retainer ring.
You may need to support the headband
in position while doing this, or just take
off headset and adjust, as the fit is snug.
OR
For over-the-ear use
3.3 Choose the earloop size (small,
21
medium, or large) that should best fit
your ear. (You may need to experiment
to find the best comfort).
3.4 Determine right or left ear wearing
position and snap the headset
speaker capsule into the
earloop ring accordingly.
3.5 While wearing the headset, adjust
the microphone tip toward the corner of
your mouth by rotating the speaker
capsule within the earloop retainer ring.
You may need to support the earloop in
position while doing this, or just take off
headset and adjust, as the fit is snug.
Maintenance and Troubleshooting sections are in the Product Information Booklet at www.plantronics.com/documentation/
C
XAMINE THE OMPONENTS OF THE
Talk Button
14
Charge Listen Volume/
15
9
Indicator Mute Control
(Amber)
IntelliStand
10
Switch
Speak Volume
13
Fine Tune
Microphone
18
Listen
Volume
Master
Back View
CS50 W
IRELESS
This Quick Start Guide and the Product Information Booklet are located on our website at
www.plantronics.com/documentation/. Choose your language preference and Plantronics model number
1.1
25
1.2
Underside of Base
3.1
configuration of your choice.
4.2 Remove the telephone
handset from its base, taking it
"off-hook" .
4.3 Press the talk button on the headset.
The talk indicator lights on both the base
headset
3.2
You should now be able to hear a dial tone through
the headset.
4.4 If not, you need to
adjust your telephone
configuration dial
the base to another one
3.3
of its 4 positions until you
hear the tone.
4.5 Continue
3.4
configuration setup by
making a test call to a
friend or associate using
the key pad on your
telephone.
3.5
4.6 If they cannot hear you at all try changing
your telephone configuration dial on the base to
another one of its 4 positions until you hear them
and they hear you. Volume adjustments can be
made separately as described in the next step.
CORDLESS HEADSET
Microphone Boom
16
Talk Indicator Light
17
Outside View
19 Battery Contacts
Inside View
O H
FFICE EADSET
2
1.3
1.4
*Optional Telephone
Handset Lifter
Setup and Test
Your System
4.1 Begin with your
"charged" headset
4.1
mounted in the
4.3
and
2
should go on, indicating a successful link.
17
4.4
on
4
CS50 S
YSTEM
WEARING OPTIONS
Small
Headset
20
Speaker
Capsule
AC Power Adapter
24
S
YSTEM
Charge the Headset
2.1 Dock the headset into
the charge cradle . The
1
amber charge indicator
9
will flash during charge.
If charge indicator does not
go on, reposition headset
in the cradle.
2.2 The charge indicator
will go steady after headset
is fully charged and ready for
use (approximately 3 hours).
Make Volume and Final
Adjustments
5.1 Adjust your
listening volume
with the listen
volume control
dial located towards
the back of the headset capsule.
Rock the dial up or down for
volume changes.
5.2 For "larger step" adjustments
to your listening volume, change
the position setting on the listen
volume master switch located on
the back of the base.
5.3 Push in the mute control
to activate mute, push in again to
de-activate mute. (You will hear a
slight beep in the speaker when
mute is activated.)
5.4 Adjust your speak volume
4
(how others hear you) with the
speak volume fine tune buttons
13
on the back side of the base.
5.5 For "larger step" adjustments
to your speak volume, change the position
setting on the talk volume master
located on the bottom of the base.
5.6 You can now activate your IntelliStand feature if you
have installed the optional handset lifter. When enabled,
this feature provides automatic Lifter activation by simply
removing and replacing your headset
in the base unit (no need to press
the talk button on the headset).
To enable, slide the IntelliStand
switch located on the side
of the base to the on position
(down) or disable by sliding
to the off position (up).
Medium Large
Earloops
21
Headband
22
T-Pad
23
Headset Retainer
Short Cord
25
2.1
1
9
15
5.1
5.2
15
5.3
switch
12
5.5
5.6