FX-MG8156ZT,MG8156ZT-91,MG8317ZT,MG8317ZT-91
-
Removing the Cassette Mechanism Module (Fig.3)
Remove the four screws and then remove the
Cassette Mechanism Module.
- Removing the Control Unit (Fig.4)
1. Unbend the tabs at two locations indicated by arrows until straight.
2. Remove the screw F.
3. Disconnect the two connectors, and then remove the Control Unit.
- Removing the Mechanism Unit (Fig.4)
1. Remove the five screws G, and then remove the four Holders and four Dampers.
2. Remove the two springs A, spring B spring C, and four tubes from the hock.
3. Remove the Mechanism Unit from the Chassis.
Holder
G
Damper
84
Damper
G
Holder
A
Tube
Tube
Chassis
Cassette Mechanism Module
B
Tube
Mechanism Unit
C
Tube
A
G
Holder
Damper
Fig.3
F
Control Unit
Damper
G
Holder
G
Fig.4