Advertisement
Quick Links
SErENITy STudIO
42"
39 1/4"
71 3/4"
20"
58 1/4"
SPECIFICATIONS:
GeneRal SPecIfIcatIonS:
Tub Size
71 3/4" x 39 1/4" x 23 1/2"
182 cm x 100 cm x 60 cm
Bathing Well
42" long
21" wide
20" interior depth
Shipping Weight
300 lbs. / 136 kg
Tub Weight Filled
798 lbs. / 363 kg
Tub Weight Only
194 lbs. / 88 kg
Gallons to Overflow 76 gal. / 288 L
electRIcal SPecIfIcatIonS:
Blower/Heater
1 HP; 10.5 AMP; 120V
Requirement
15 AMP; 120V, separate circuit
required protected w/ Class A GFCI
fax-on-demand
document # 1201
Each Serenity Air Bath model is equipped with a 600 watt air heating system to raise the temperature of the air going into the bath. This air tem-
perature will be less than the bathing temperature of the water, but will help to reduce a rapid decrease in water temperature. In addition, the air
coming from the air jets will feel cool against the skin, just as a breeze on a warm day cools your body. This system does not heat the water.
The manufacturer accepts a 1/4" variance. There are variations on each tub and specifications are subject to change as we improve upon our product as required. The dimensions needed for site preparation
and structure building should be measured from the tub; Aquatic Industries, Inc. assumes no responsibility for preparatory work.
January 2008
SErENITy STudIO 17
17"
21"
Deck Width
3 1/2"
21 1/2"
StandaRd eQUIPMent:
air Bath System:
- 59 Air Jets
- 1 HP Variable Speed, Remote Air Blower with 20-Minute Timer
- 600 Watt Air Heating System
- Electronic Control Package with Wave and Pulse Features
- Automatic Purge and Dry Cycle
- Waterproof Remote Control with infrared sensor and 25' cord
aquatic Quality features:
- Air Channels Lined with Antimicrobial Coating
- Extra Deep Bathing Well
- Durable, Easy to Clean, Lucite® Cast Acrylic Surface
- Available in 8 Standard No-Charge Colors
Ul & IaPMo listed, factory tested
limited lifetime Warranty
# AI17AIR7240F / AI17AIR7240FTo (Tub only)
Model
note: This model is shown with the optional towel bar.
note: The interior of bathing well and outside of bathing well can each
be specified in a different color. Only one premium color upcharge will be
applied if one or more premium colors are used.
note: This model requires a remote blower location. The connection for the
air blower is under the tub; the blower may be placed up to 15 feet away
and connected by piping under the floor. Please refer to the Owner's Manual
for detailed installation instructions. Document #1184 on our Fax-on Demand
System or on our website at www.aquaticwhirlpools.com.
23 1/2"
Blower
Connection
27"
oPtIonal eQUIPMent:
Comfort Pillow - Oval or Rectangle
•
Factory Installed Towel Bar
•
- Chrome, Polished Brass, Satin Nickel,
Polished Nickel, Oil Rubbed Bronze or Gold
Waste and Overflow for Freestanding Models
•
- Chrome, Polished Brass, Satin Nickel,
Polished Nickel, Oil Rubbed Bronze or White
Premium Colors
•
All acrylic colors featured by Aquatic match the
industry's leading fixture manufacturers.
www.aquaticwhirlpools.com
Two Person Bath
Rough-In Plumbing
Measurements
12 1/8"
4 3/4"
800.555.5324
85
Advertisement
