Changing the memory card - data-transfer mode
Care should be taken when changing memory cards while the camera is attached to a computer.
Data could be lost or damaged if the camera is not disconnected properly.
Windows 98 and 98SE
1. Disconnect the USB cable.
Never remove the USB
2.Turn off the camera.
cable while the viewfinder
3. Change the memory card.
indicator lamp is lit!
4. Reconnect the USB cable.
5. Turn on the camera to remake the
USB connection.
Windows Me, 2000 professional, and XP
1. Stop the USB connection using the unplug-or-eject-hardware routine (p. 74).
2. Disconnect the USB cable.
3. Turn off the camera.
4. Change the memory card.
5. Reconnect the USB cable.
6. Turn on the camera to remake the USB connection.
Macintosh
1. Stop the USB connection by dragging the drive icon into the trash (p. 75).
2. Disconnect the USB cable.
3. Turn off the camera.
4. Change the memory card.
5. Reconnect the USB cable.
6. Turn on the camera to remake the USB connection.
71