Flash Range - Auto-Recording Mode; Flash Signals; Camera-Shake Warning - Minolta DiMAGE S404 Instruction Manual

Konica minolta instruction manual digital camera dimage s404
Hide thumbs Also See for DiMAGE S404:
Table of Contents

Advertisement

FLASH RANGE - AUTO-RECORDING MODE

The camera will automatically control the flash output. For well-exposed images, the subject must be
within the flash range. Because of the optical system, the flash range is not the same at the lens'
wide-angle position as it is at the telephoto position.
Wide-angle position
Telephoto position
At the wide-angle lens position, when using the flash with subjects closer than 1m (3ft.), vignetting
can occur. A slight shadow or shading may be apparent at the bottom of a horizontal image.

FLASH SIGNALS

CAMERA-SHAKE WARNING

If the shutter speed falls below the point where the camera can be safely hand held, the camera-
shake warning will appear on the LCD monitor and the orange focus lamp will blink slowly. Camera
shake is slight blurring caused by subtle hand motion and is more pronounced at the telephoto
setting of the lens than at the wide-angle setting. Although the warning appears, the shutter can still
be released. If the warning appears, the following steps can be taken:
• Place the camera on a tripod.
• Use the built-in flash.
• Zoom the lens towards the wide-angle position until the warning disappears.
0.5m ~ 3.5m (1.6 ft. ~ 11.5 ft.)
0.9m ~ 3.0m (3.0 ft. ~ 9.8 ft.)
The orange flash lamp next to the viewfinder indicates the
status of the flash. When the lamp glows steadily, the
flash is charged and ready to fire. When the lamps blinks
quickly, the flash is charging and the shutter will not
release. The flash lamp is also used as a camera-shake
warning, see below.
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents