Troubleshooting - Konica Minolta DiMAGE G400 Instruction Manual

Troubleshooting

- If the following does not solve your problem, please contact the point of
purchase.
Symptom
Power Power will not turn ON
Supply
Power turns OFF right
after turning on
Shooting Can't take a picture
the even if pressing the
pictures shutter button
Can't focus
LCD monitor display
and images are not
clear
Doesn't Flash
Check this:
• Battery level too low
• Battery inserted incorrectly
• AC Adaptor attached incorrectly
• Battery level too low
• The battery has reached the end of
its service life.
Fit a new battery
• Low ambient temperature
• Power supply not on.
• SD Memory Card or Memory Stick's
write protected.
• Pictures taken have reached the
maximum number.
Erase unwanted pictures.
• Set to the Self-Timer mode.
• Flash being charged.
• Subject not in the center
• Subject hard to focus
• Dirty lens
• Incorrect distance from the subject
• LCD brightness adjusted incorrectly
• Finger prints or dirt on the monitor
• Set to "Flash off " mode
Page
21
21
24
21
13,20
137
28
15
51
61
45
41
41
34
36
112
133
46
131