Extech Instruments EasyView EA11A User Manual page 4

Memory
The meter memory allows for the storage and recall of up to 150 temperature measurements.
1. Press the MEM button to store the reading into memory. "MEM" will briefly appear on the display
and the memory location will be indicated on the display.
2. Press the READ button to recall the data from the indicated memory location
a. "READ" and the stored value will appear in the display
b. Press the ▲ ▼ buttons to step through the memory locations.
c. To exit the READ function, Press the READ button.
3. To clear data in memory
a. Turn the meter OFF
b. Press and Hold the MEM button and press the
c. Release the MEM button and ALL CLr and NO will appear in the display.
d. Press the ▼ button to select YES (delete data in memory) or NO (escape without
deleting).
e. Press the MEM button to implement the choice and exit the function.
Auto Power Off
To conserve battery life, the meter will go into the sleep mode if no button is pressed for 30 minutes.
"P" is displayed on the LCD when this feature is enabled.
To disable the feature:
1. With the meter OFF, Press and Hold the HOLD button and press the
2. P and OFF will briefly appear on the display indicating that the auto power off feature is
disabled.
3. "P" will not be displayed.
Note: Auto power off is enabled every time the meter is powered on and is automatically disabled
when the MX/MN feature is enabled.
Battery Replacement
When the "BT" low battery icon appears in the display measurement accuracy may be affected.
Replace the 6 AAA batteries by removing the rear screw and battery compartment cover.
You, as the end user, are legally bound (Battery ordinance) to return all used batteries
and accumulators; disposal in the household garbage is prohibited!
You can hand over your used batteries / accumulators at collection points in your
community or wherever batteries / accumulators are sold!
Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the
end of its lifecycle
Cleaning
Periodically wipe the case with a damp cloth and mild detergent. Do not use abrasives or solvents.
Wipe dry as necessary.
power button.
4
power button.
EA11A-EU-EN v1.3 01/14