Uninstalling The Driver Software - Windows - Minolta DiMAGE E223 Instruction Manual

Camera Notes
Image files contain exif tag data. This data includes the time and date the image was
recorded as well as the camera settings used. This data can be viewed with the camera
or the DiMAGE Viewer software. If a camera image is opened in a photo-retouching appli-
cation like Adobe Photoshop, and then the image is saved overwriting the original data,
the exif tag information is erased. When using software other than the DiMAGE Viewer,
always make a backup copy of the image files to protect the exif tag data.

Uninstalling the driver software - Windows

1.Connect the camera to the computer with the USB cable. Other devices must not be connected to
the computer during this procedure.
2.Right click on the My-computer icon. Select "properties" from the drop-down menu.
Windows XP: from the start menu go to the control panel. Click on the performance and
maintenance category. Click "System" to open the system properties window.
3.Windows 2000 and XP: select the hardware tab in the properties window and click the device-
manager button.
Windows 98 and Me: click the device-manager tab in the properties window.
4.The driver file will be located in the universal-serial-bus-controller or other-devices location of the
device manager. Click on the locations to display the files. The driver should be indicated with the
camera name. Under certain conditions, the driver name may not contain the camera name.
However, the driver will be indicated by either a question mark or exclamation point.
5.Click on the driver to select it.
6.Windows 2000 and XP: click on the action button to display the drop-down menu. Select "uninstall."
A confirmation screen will appear. Clicking "Yes" will remove the driver from the system.
Windows 98 and Me: click the remove button. A confirmation screen will appear. Clicking "Yes" will
remove the driver from the system.
7.Disconnect the USB cable and turn off the camera. Restart the computer.
53