Viewing Images On A Television - Minolta DiMAGE E223 Instruction Manual

Viewing images on a television

It is possible to view camera images on your television. The camera has a video-out terminal to make
the connection using the supplied Video cable. The camera is compatible with the NTSC and PAL
standards. The video-output setting can be checked and set in the setup mode (p. 38).
1.Turn off the television and the camera.
2.Insert the mini-plug end of the Video
cable into the camera's video-out
terminal.
3.Plug the yellow end of the Video
cable into the video input terminals
on the television.
4.Turn the television on.
5.Change the television to the video
channel.
6.Turn the camera's mode dial to the
playback position and turn the
camera on. The camera's monitor will
not activate when the camera is
attached to a television. The
playback-mode display will be visible
on the television screen.
7.View images as described in the playback section.
• The movie clip's audio track will be played back on the camera.
37