Connecting The Camera To A Computer - Minolta DiMAGE E223 Instruction Manual

Connecting the camera to a computer

Confirm the battery has sufficient power before connecting the camera to a computer, the full-battery
indicator should be displayed on the monitor. The auto power off function is disabled when the cam-
era is connected to a computer. The use of the AC adapter (sold separately) is recommended over
the use of the battery. For users with Windows 98 or 98SE, read the section on how to install the
required USB driver before connecting the camera to a computer (p. 49).
PC MODE
4
1.The memory-type option in the setup mode must be
1
2.Start up the computer. The computer
3.Open the terminal cover. Attach the
3
4.Attach the other end of the USB cable
• The camera should be connected
• When the camera is connected to a
set to the storage location of the images (p. 38 and
45). Turn the mode dial to the data transfer position.
must be on before connecting the
camera.
smaller plug of the USB cable to the
camera. Make sure the plug is firmly
attached.
to the computer's USB port. Make
sure the plug is firmly attached.
directly to the computer's USB port.
Attaching the camera to a USB hub
may prevent the camera from
operating properly.
computer, the LCD monitor is off.
47