Warpia Dock n’ Charge SWP240A Product Manual page 9

Using the video outputs
The video outputs on the Dock n' Charge consist of one HDMI connector and
one DVI-I connector. A VGA monitor can be plugged into the DVI-I output with the
included DVI to VGA adapter. You can simultaneously connect up to two external
displays to the docking station using the two video outputs. You do not have to
disconnect the docking station from your computer each time when you connect the
external displays.
To use the video outputs, connect a DVI cable (or VGA cable using the included
adapter) to an external display. For displays with an HDMI input or for connecting
the docking station to a television, you can use the available HDMI output. This
output supports both video & audio to the television.
9