Warpia Dock n’ Charge SWP240A Product Manual page 26

Audio
You cannot hear anything through your notebook computer speakers or you
cannot use the audio connectors on the notebook computer.
By default, notebook computers use the headset jack on the docking station and
disable built-in audio connectors when the docking station is connected.
To enable the built-in audio connectors on your computer, depending on the
operating system you are using, do one of the following:
For the Windows Vista, Windows 7, Windows 8, or Windows 8.1 operating
systems:
1. Right-click the volume icon in the Windows notification area.
2. Select Sounds, and the Sound window is displayed.
3. Click the Playback Devices tab to select a different built-in audio device, and
then click the Recording Devices tab to select another built-in microphone device
For the Windows XP operating system:
1. Right-click the volume icon in the Windows notification area.
2. Select Adjust Audio Properties, and the Sound and Audio Devices Properties
window is displayed.
3. Click the Audio tab.
4. Select a built-in audio device from the Sound playback panel, and then select
another built-in audio device from the Sound recording panel.
26