Installing The Warpia Dock N' Charge; Installing The Device Driver - Warpia Dock n’ Charge SWP240A Product Manual

4. Installing the Warpia Dock n' Charge

4.1 Installing the Software Driver
Insert the CD into the computer and laptop CD-ROM
• The disc should start automatically. If the disc does not start automatically, do
one of the following:
• If the autoplay window opens, click Run Warpia.exe
• If the autoplay window does not open, do one of the following:
– For the Windows XP, Windows Vista, or Windows 7 operating system, go into
My Computer or Computer, then double-click the CD/DVD drive icon.
– For the Windows 8 or Windows 8.1 operating system, open File Explorer and
click Computer or This PC, then double-click the CD/DVD drive icon.
• Follow the instructions on the screen to install the device driver.
• Restart your computer after the completion message is displayed. The system will
automatically identify and configure the docking station. The video output function
of the docking station will be automatically enabled after the configuration is
completed.
Installing driver directly from Warpia.com:
• Go to www.warpia.com/support/drivers
• Click on the Dock n' Charge (SWP240) Driver Download
• Click on the Download Windows Driver Icon
• Once driver is downloaded, click on driver file to load driver
5