Jeep Grand Cherokee SRT8 2010 Owner's Manual page 330

Cooling System — Drain, Flush and Refill
If the engine coolant (antifreeze) is dirty or contains a
considerable amount of sediment, clean and flush with a
reliable cooling system cleaner. Follow with a thorough
rinsing to remove all deposits and chemicals. Properly
dispose of the old engine coolant (antifreeze).
Refer to "Maintenance Schedule" for further information.
Selection Of Coolant
Use only the manufacturer's recommended coolant. Re-
fer to "Fluids, Lubricants, and Genuine Parts" in "Main-
taining Your Vehicle" for further information.
• Mixing of engine coolant (antifreeze) other than
specified HOAT engine coolant (antifreeze), may
result in engine damage and may decrease corro-
sion protection. If a non-HOAT engine coolant
(antifreeze) is introduced into the cooling system
in an emergency, it should be replaced with the
specified engine coolant (antifreeze) as soon as
possible.
• Do not use water alone or alcohol based engine
coolant (antifreeze) products. Do not use addi-
tional rust inhibitors or antirust products, as they
may not be compatible with the engine coolant
(antifreeze) and may plug the radiator.
I n f o r m a t i o n P r o v i d e d b y :
MAINTAINING YOUR VEHICLE 329
CAUTION!
(Continued)
7