Notices - FujiFilm Finepix S200 EXR Basic Manual

For Your
Safety
NOTICES
Signature, Managing Director Date
August I, 2009
Place
Kleve, Germany
FUJI FILM Electronic Imaging Europe GmbH
Benzstrasse 2
47533 Kleve, Germany
declare that the product
Product Name: FUJIFILM DIGITAL CAMERA FinePix S200EXR
Manufacturer's Harne:
FUJIFILM Corporation
Manufacturer's Address: 7-3, AKASAKA 9-CHOME, MINATO-KU,
TOKYO 107-0052 JAPAN
conforms to the following Standards:
Safety: EN60065: 2002
+
A1: 2006
EMC:
EN55022: 1998
+
A1: 2000
+
A2: 2003 Class B
EN55024: 1998
+
A1: 2001
+
A2: 2003
EN61000-3-2: 2006
EN61000-3-3: 1995
+
A1: 2001
+
A2: 2005
following the provision of the EMC Directive (2004/108/EC)
and Low Voltage Directive (2006/95/EC).
CE
See http://www.dtsc. We
Name:
Address:
Please read the "Safety Notes" (pages iii-v) and make sure you understand
them before using the camera.
Perchlorate Material-special handling may apply.
ca. go v/hazardous was te/perchlora te.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CAUTION
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particu-
lar installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved
in this manual could void the user's authority to operate the equipment.
Notes on the Grant
To comply with Part 15 of the FCC Rules, this product must be used with a
FUJI FILM-specified ferrite-core
AN
cable, USB cable, and DC supply cord.
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
vi