Settings Required For Network Printing; Network Connection That Can Be Selected; In Each Of Different Windows Oss - Konica Minolta IP-711 User Manual

4. Settings Required for Network Printing

This chapter explains the settings that need to be made for network printing.
Make the necessary settings for network printing by following the procedures given
below.
1. Referring to "3. Settings Required for Local Connection," install the printer
driver. p.7
At this time, select "LPT1" for the port.
NOTE
Do not execute a test print at this time.
Do that after the network connections and settings have been made.
2. Following the instructions given in this chapter, make the necessary settings for
network printing.
Change the port of the printer driver installed in step 1 to one for the network
connection and change the settings on the controller side as may become
necessary.
NOTE
For the IPP connection, it is necessary to start with the step to add the printer
driver.
4.1 Network Connection That Can be Selected in Each of
Different Windows OSs
Different setting procedures apply depending on the output method (LPR, Windows
Printing, IPP).
Select the connection scheme optimum for the operating environment.
Windows
98,98SE
LPR
Windows
Printing
IPP
Windows Windows
Me NT4.0
Windows Windows
2000 XP
17
Protocol Used
TCP/IP
NetBEUI
TCP/IP