Sony DAV-DZ870KW Operating Instructions Manual page 83

Your room
This unit
ID A
ID A
S-AIR sub unit
Pairing
To perform pairing
1
Place the S-AIR sub unit that you want
to pair near the unit.
Note
• Remove headphones from the surround
amplifier (if connected).
2
Match the IDs of the unit and the S-AIR
sub unit.
• To set the ID of the unit, see "To set the ID
of the unit" (page 80).
• To set the ID of the surround amplifier,
see "To set the ID of the surround
amplifier" (page 81).
• To set the ID of the S-AIR receiver, refer
to the operating instructions of the S-AIR
receiver.
3
Press FUNCTION +/– repeatedly until
"DVD" appears in the front panel
display.
4
Press DISPLAY while the system is
in stop mode.
The Control Menu display appears on the
TV screen.
5
Press X/x to select
then press .
The options for [SETUP] appear.
6
Press X/x to select [CUSTOM], then
press .
The Setup Display appears.
Neighbor
No transmission
ID A
S-AIR sub unit
[SETUP],
7
Press X/x to select [AUDIO SETUP],
then press .
The options for [AUDIO SETUP] appear.
8
Press X/x to select [S-AIR SETUP t],
then press .
9
Press X/x to select [PAIRING], then
press .
The confirmation display appears.
10
Press C/c to select [YES], then press
.
The unit starts pairing.
To not perform pairing, select [NO].
11
Start pairing of the S-AIR sub unit.
x For the surround amplifier
Press POWER on the surround amplifier to
turn on the surround amplifier and press
PAIRING on the rear panel of the surround
amplifier.
The PAIRING indicator of the surround
amplifier flashes red when pairing starts.
When sound transmission is established,
the PAIRING indicator of the surround
amplifier turns red and the confirmation
display appears.
Tip
• To press PAIRING on the rear panel of the
surround amplifier, a slim instrument, such as a
paper clip, can be used.
x For the S-AIR receiver
Refer to the operating instructions of the
S-AIR receiver.
When sound transmission is established,
the confirmation display appears.
Note
• Perform the pairing within several minutes after
Step 10. If you do not, the pairing is canceled
automatically and the confirmation display
appears. To perform pairing, select [YES]. To
return to the previous display, select [NO].
12
Press C/c to select the next operation.
x To finish pairing
Select [NO], then press
x To perform pairing of another S-AIR
sub unit
Select [YES], then press
.
.
83
GB