Toyota Camry 2011 Quick Reference Manual page 75

■
Setting and canceling the functions
To switch between setting and canceling, follow the procedure
below:
Vehicles with smart key system:
STEP 1
Close all the doors and switch the "ENGINE START STOP"
switch to IGNITION ON mode. (Perform the step 2 within 20
seconds.)
Vehicles without smart key system:
Close all the doors and switch the engine switch to the "ON"
position. (Perform step 2 within 10 seconds.)
STEP 2
Function
Shift position linked door lock-
ing function*
Shift position linked door
unlocking function*
Speed linked door locking func-
tion
Driver's door linked door unlock-
ing function
*
: Vehicles with an automatic transmission only
1-2. Opening, closing and locking the doors and trunk
Shift the shift lever to P or N, and
press and hold the driver's door
lock
approximately 5 seconds and
then release.
The shift lever and switch posi-
tions
desired function to be set are
shown as follows.
Use the same procedure to can-
cel the function.
Shift lever
position
I n f o r ma t i o n P r o v i d e d b y :
P
N
or
switch (
corresponding
Driver's door lock
switch position
1
) for
to the
47