Messages In The Multifunction Display - Mercedes-Benz CLS Operator's Manual

Hide thumbs Also See for CLS:
Table of Contents

Advertisement

Vehicle status messages in the multifunction display
Vehicle
Display messages
P
Gear
Selector
Lever In
P Position
P/N
Please
Shift To
N or P
Tires
Display messages
Check
then
tires,
restart
Run Flat
Indicator.
Run Flat
Inoperativ
Indicator
e
Possible causes/consequences and X Solutions
You have opened the driver's door while the engine was not
running and the automatic transmission was not in park
position P.
X
Shift the automatic transmission into park position P.
You have attempted to turn off the engine with the KEYLESS-
GO start/stop button while the automatic transmission was
not in park position P.
X
Shift the automatic transmission into park position P.
You have attempted to start the engine with the KEYLESS-GO
start/stop button while the automatic transmission was in
reverse gear R or drive position D.
X
Shift the automatic transmission into park position P or
neutral position N. Make sure the brake pedal is depressed.
Possible causes/consequences and X Solutions
There has been a warning message about a loss in the tire
inflation pressure and the tire pressure loss warning system
was not restarted yet.
X
Make sure the correct tire inflation pressure is set for each
tire.
X
Then restart the tire pressure loss warning system
(
Y
page 186).
The tire pressure loss warning system is malfunctioning.
X
Have the tire pressure loss warning system checked at an
authorized Mercedes-Benz Center.
235
Z

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cls 550Cls 63 amg

Table of Contents