nubeca BA2219 Instruction Manual

Fully automatic upper arm style

Advertisement

Quick Links

Model No.:BA2219
A00

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BA2219 and is the answer not in the manual?

Questions and answers

Summary of Contents for nubeca BA2219

  • Page 1 Model No.:BA2219...
  • Page 2: Table Of Contents

    Before Using the Monitor Introduction ....................1 Thank you for purchasing Fully Automatic Upper Arm Style Digital Symbols Use .....................2 Blood Pressure Monitor. Important Safety Notes ................3 Konw Your Unit ..................4-5 The unit uses the oscillometric method of blood pressure IHB Introduction ..................6 measurement.
  • Page 3: Symbols Use

    Symbols Use To assure the correct use of the product basic safety measures SYMBOLS USED IN THIS INSTRUCTION MANUAL should always be followed including the precautions listed below: Indicates a potentially hazardous situation which, if not WARNING avoided, could result in death or serious injury. Read all information in the instruction manual and any other Indicates a potentially hazardous situation which, if not literature included in the box before using the unit.
  • Page 4 Know Your Unit Know Your Unit Body Arm Cuff Air Plug (Insert to Air Socket) Fit for 22cm~32cm Display range of upper arm perimeter Back Light AC Adapter Socket Hose Memory Button Setting Button START/STOP Button Metal If your arm cuff is broken or not functional, please use a new cuff. A new arm cuff does not include an air plug.
  • Page 5: Ihb Introduction

    IHB Introduction Before Taking A Measurement 1.Avoid eating,drinking alcohol, smoking, exercising and bathing for Irregular Heartbeat Symbol( 30 minutes before taking a measurement. 2.Stress raises blood pressure. Avoid taking measurements during When the unit detects an irregular rhythm two or more times during stressful times.
  • Page 6 Remove the battery cover from the battery compartment. Install 4 “AA” size batteries so the + (positive) and - (negative) polarities match the polarities of the battery compartment as indicated. Replace the battery cover. Press the “START/STOP” button. All symbols appear,then the cuff starts to inflate automatically.
  • Page 7: Adjusting Settings

    Adjusting Settings Adjusting Settings 1. To set year time system conversion 1.1 All information will appear when the batteries are installed at the first time.After 2 seconds the year flashes. Finally, press the “SET” button and continue with step 2. 1.2 The mark of year appears and flashes after press the “SET”...
  • Page 8: To Set Unit

    Adjusting Settings Adjusting Settings 5. To set Volume If select to display the date and time, the current date and time will display when turned off. Press the “ ” button and the volume change circularly from level 0 to level 7. Press the “SET” button and return the step 1. Press the “START/STOP”...
  • Page 9: Proper Use Of The Arm Cuff

    Proper Use of the Arm Cuff Proper Use of the Arm Cuff Put your arm through the loop, then pull it up to the Make sure the air plug is position of your upper arm. inserted properly in the main unit. The hose runs down the Remove all clothes from inside of your arm.
  • Page 10: Take A Measurement

    Take a Measurement Take a Measurement Press the “START/STOP” button. Press the “START/STOP” button to turn off the unit. All display symbols appear. The cuff starts to inflate automatically. The unit will automatically turn off after 2 minutes if you have forgotten to turn it off.
  • Page 11: Use The Memory Function

    Use the Memory Function Use the Memory Function ......... To delete the memory value The unit stores the blood pressure and pulse rate in the memory after completing a measurement every time. It can automatically In the memory reading mode, press the “SET” button for 4-6 seconds, store 180 sets of measurement values for 2 users (2*90).
  • Page 12: About Blood Pressure

    About Blood Pressure About Blood Pressure Blood Circulation Classification of Blood Pressure After each measurement is completed, the LCD display will show your The blood circulation is responsible for supplying the body with oxygen. position automatically on the six segments of the bar indicator which Blood pressure is the pressure exerted on the arteries.
  • Page 13: Care And Maintenance

    Exceptional Situations Care and Maintenance Care Error Indicators Keep the unit in the storage case The following symbol will appear on the display when measuring abnormally. when not in use. Clean the unit with a soft dry cloth. Symbol Cause Correction Do not use any abrasive or volatile cleaners.
  • Page 14: Indications For Use Statement

    Indications for Use Statement The unit is intended to be used to measure blood pressure (systolic and diastolic) and heart rate from the upper arm by using BA2219 the oscillometric method. The unit is intended for usingin only adult population,not applied to the other populations such as neonatal baby.
  • Page 15: Warranty Information

    Warranty Information Warranty Information requirements; EN1060-3: Non-invasive sphygmomanometers – Part 3: Federal law restricts this device to sale by or on the order of a physician. Supplementary requirements for electro-mechanical blood pressure The unit, excluding the unit cuff, is guaranteed to be free of defects in workmanship and materials for a period of two years from the date listed measuring system.
  • Page 16 Warranty Information Warranty Information Guidance and manufacture’s declaration – electromagnetic immunity Caution: This unit has been thoroughly tested and inspected to assure proper performance and operation! The Digital Blood Pressure Monitor is intended for use in the electromagnetic environment specified below. The customer or the user of Digital Blood Pressure Monitor should assure WARNING: that it is used in such an environment.
  • Page 17 Warranty Information IEC 60601 test Compliance Immunity test Electromagnetic environment - guidance level level survey,a should be less than the compliance level in each frequency range. b Interference may occur in the vicinity of 3A/m Radiated RF equipment marked with the following 80 MHz to 2.5 3A/m IEC 61000-4-3...

This manual is also suitable for:

Ba2015

Table of Contents