Sound Adjustment - Panasonic SC-PM45 Operating Instructions Manual

Using the play timer Using the play timer
You can set the play timer to come on at a certain time to
wake you up.
Preparation
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio,
USB or music port source, and set the volume.
1 Press [CLOCK/TIMER] repeatedly to select play
timer.
CLOCK
Original display
Within 5 seconds, press [ /4] or [ /¢] to set the
2
starting time.
3 Press [CLOCK/TIMER] to confirm.
4
Repeat steps 2 and 3 to set the finishing time.
To activate the timer
Press [˚ PLAY] to turn on your timer.
5
"˚ PLAY" is displayed.
Press [y] to turn off the unit.
6
The unit must be off for the timer to operate.
To Action
change the settings Repeat steps 1 to 4 and 6.
change the source 1) Press [˚ PLAY] to clear the timer
or volume indicator from the display.
2) Make changes to the source or volume.
3) Perform steps 5 and 6.
check the settings Press [CLOCK/TIMER] repeatedly to
select ˚ PLAY.
(when the unit is on
or in standby mode)
cancel Press [˚ PLAY] to clear the timer indicator
from the display.
Note
• The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.
• If you turn the unit off and on again while a timer is functioning, the
fi nish time setting will not be activated.
• If MUSIC PORT is selected as the source when the timer comes
on, the system turns on and engages MUSIC PORT as the source.
If you wish to playback from the portable audio equipment, activate
the equipment's play mode and increase the volume. (See the
portable audio equipment's instruction manual.)
˚ PLAY
Start time
Play timer indicator
Finish time

Sound adjustment

Selecting sound effects Selecting sound effects
You can change the sound effect by selecting Preset EQ or
adjusting the bass or treble effect.
Preset EQ Preset EQ
Press [PRESET EQ] repeatedly to select your desired
setting.
HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifi es higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
EQ-OFF No effect
Bass or treble Bass or treble
Enables you to enjoy the lower or higher pitch sound.
1 Press [BASS/TREBLE] repeatedly to select your
desired setting.
BASS
original display
Setting Effect
BASS For lower pitch sound
TREBLE For higher pitch sound
Press [ /4] or [ /¢] to adjust the level.
2
Note
The tone level can be varied within -4 to +4.
Enjoying surround sound Enjoying surround sound
Enables you to add natural width and depth to the stereo
sound.
To activate
Press [SURROUND] to display "
To cancel
Press [SURROUND] again to clear "
indicator.
Note
• Surround sound is less discernible when listening through
headphones.
• If interference in FM stereo reception increases, cancel the surround
sound effect.
TREBLE
" indicator.
"
11