Technical Specifications - Bajaj Pulsar 150 DTS-i User Manual

Technical Specifications

Engine : 4 stroke, Single Cyl., Natural air
cooled.
Bore x Stroke : 58.00 mm x 56.40 mm
Engine Displacement : 149.01 cc
Compression Ratio : 9.5 + 0.5 : 1
Max. Net Power : 15.05 Ps at 9000 rpm
Max. Net Torque : 12.45 Nm at 6500 rpm
Ignition System : Microprocessor controlled digital
CDI
Spark Plug : Champion RG 4 HC, 2 Nos.
Spark Plug Gap : 0.6 to 0.8 mm
Lubrication : Wet sump, Forced.
Transmission : 5 speed constant mesh.
Front Brake : Hydraulic disc type.
Rear Brake : Mech. expanding shoe & drum
type.
Fuel Tank Capacity :
Full : 15 litres
Reserve : 3.2 litres
Usable Reserve : 2 litres
Dimensions :
Length : 2055 mm
Width : 790 mm
Height : 1100 mm
Wheel base : 1320 mm
Min. Turning radius : 2320 mm (Min.)
Ground clearance : 165 mm (Min.)
Tyre Size Front : 2.75 x 17", 41P
Rear : 100/90 x 17", 55P
Tyre Pressure Front : 1.75 kg/cm (25 PSI)
Rear (Solo) : 2.00 kg/cm (28.5 PSI)
Rear (Pillion) : 2.25 kg/cm (32 PSI)
Electrical System
Head Lamp
Pilot Lamp
Tail /Stop Lamp
Turn Signal Lamp
Neutral Indicator Lamp
Hi Beam Indicator Lamp
Turn Pilot Indicator Lamp : LED
Side Stand Indi. Lamp
Speedometer Lamp
Rear No. Plate Lamp
Horn
Battery
Vehicle Kerb Weight
Gross Vehicle Weight
Climbing Ability
Note : All dimensions are under UNLADEN condition.
Above information is subject to change without any
notice.
2
2
2
: 12 Volts DC
: 35/35 W-HS1
: 5 W Each 2 Nos.
: LED/LED
: 10 W (2 nos.)
: LED
: LED
: LED
: LED Display
: 5 W
: 12 V DC, 2 nos.
: 12V - 9 Ah
: 143 kg.
: 273 kg.
: 28% (16 max) 0
2