Wheel, Tyre, Drive Chaine Maintenance; Tyre Pressure - Bajaj Pulsar 150 DTS-i User Manual

General Maintenance Information
Wheel Puncture :
Use the recommended levers while removing the Tyre /
Tube for puncture work. This will avoid any damages to
the edges / scratches on paint of the wheel.

Tyre Pressure :

Keep appropriate tyre pressure as mentioned below to
increase life of the tyre & for better fuel consumption.
Front
Rear (Solo)
Rear (with Pillion)
1.75 Kg/Cm (25.0 psi) 2
2.00 Kg/Cm (28.5 psi) 2
2
2.25 Kg/Cm (32.0 psi)
Drive Chain Slackness
• Chain top edge to be kept between the two marks
during chain slackness adjustment.
• Care should be taken, that the chain should never
run dry.
• Lubricate chain from outside with SAE 90 oil at
every 500 kms.
• Chain slackness will have to be adjusted whenever
required.
16