WAGNER W 450 SE User Manual page 9

W 450 SE
Materials to be used:
Paints and varnishes containing solvents, acrylic enamel paints, water-soluble
varnishes, glazes, polishes, wood preservatives, disinfectants, plant protectives,
saturants, as well as oils and other watery liquids.
Dispersion and latex paints, bituminous paints. In the case of dispersion paints that
contain fine quartz or similar materials: Observe the specifications in the handling table.
The following spray substances are not suitable for use:
Materials containing strong abrasives, glazes with coarse particles, strippers and
caustic solutions, silicate paints.
Use of these spray materials can lead to increased wear or corrosion damage in the
pump area, which are not covered by the WAGNER-Guarantee.
Functional Description of the Spray Gun
The spray gun sucks in spray materials. The airless atomisation results when the spray
material is pumped at high pressure through the swirl system and the nozzle bore.
Preparing the Spray Material
The paints usually need to be diluted for use with the spray gun. You will find guidelines
for sprayable dilutions in the following handling table for viscosity (viscosity = consis-
tency of the paint). You can achieve the correct dilution by using the viscosity test cup.
Viscosity, valve, round nozzle and multi-step electronic system
setting data Multi-step electronic system
Fine-adjustment knob: For variable adjustment
Material
Resin primers
Resin lacquers
acrylic lacquers
Radiator paints, Hammer finish paints
Timber impregnating
Aluminium paints
Underbody protection
(wax and bitumen base)
Plastic emulsions***
Latex paints ***
* Standard nozzle
*** With paints, which contain fine quartz or other similar components, there is increased wear of
the valve and the nozzle. According to the scope of work, always have spare parts available.
Handling table
Viskosity
DIN-s
20 - 30
20 - 30
20 - undiluted
25 - 35
undiluted
20 - 30
max.
80 - 100
not measurable
approx. 10 - 20%
dilution
not measurable
approx. 5 - 20%
dilution
** Part No. see accessory list page 18.
Valve:
Atomizer Roundnozzle
colour mm
black 0,8*
black 0,8
black 0,8
black 0,8
black 0,8/1,2**
black 0,8
black 1,2**
white 0,8
1,0**
white 0,8
1,0**
GB
Step electronic
system
Adjustment %
50/25/12
50/25/12
50/25/12
50/25/12
100
50/25/12
100
100
100
50/25/12
15