Safety Instructions For Spray Guns - WAGNER W 450 SE User Manual

GB

Safety Instructions for Spray Guns

● Caution!
Wear breathing equipment: Paint mist and solvent vapors are damaging to health.
Always wear breathing equipment and only work in well ventilated rooms or using
supplementary ventilating equipment. It is advisable to wear working clothing and gloves.
● Wear a breathing mask and ear protection.
● Spray materials emerge from nozzle tips under high pressure.
Attention! Danger of injection - Never point the spray stream towards human
beings or animals. In the event of injury to the skin by paint or solvents, quick
expert treatment by a physician is essential. The physician should be informed of
the type of paint or solvent involved.
● The spray gun is to be used only for paints and solvents with a 21° C (32° in UK)
flashpoint or higher (See information on the material tin. Hazard class A II and A III
permitted).
● The device may not be used in workplaces covered by the explosion-protection
regulations.
● To avoid the hazard of explosion when spraying, provide for effective natural or
artificial ventilation.
● There must be no sources of ignition such as, for example, open fires, smoke of lit
cigarettes, cigars and tobacco pipes, sparks, glowing wires, hot surfaces, etc. in the
vicinity during spraying.
● The spray gun is not a toy; children must therefore not be allowed to handle it or
play with it.
● Before working on the spray gun remove the power plug from the socket.
● Do not use the spray guns to spray flammable substances.
● The spray guns are not to be cleaned with flammable solvents which have a
flashpoint under 21°C.
● Caution against dangers that can arise from the sprayed substance and observe
the text and information on the containers or the specifications given by the
substance manufacturer.
● Do not spray any liquid of unknown hazard potential.
Max. delivery rate:
Max. viscosity:
Max. pressure spikes:
Power source:
Power consumption: 110 W
Round spray nozzle: 0,8 mm
Weight:
1 Paint container 800 ml
2 Locking nut
3 Nozzle 0,8 mm
4 Housing
5 4-step electronic system
14
Technical Data W 450 SE
20 - 350 g/min
(runout time) 280 sec.
180 bar
230 V~
1,5 kg
Description W 450 SE (Bild
6 Fine-adjustment knob
7 ON/OFF switch
8 Grip
9 Pump housing
10 Cleaning brush
Container capacity:
Double insulation:
Pump:
Pump cylinder:
Piston:
Oscillation level:
Sound pressure level:
Sound pressure output:
)
11 Suction tube
12 Nozzle spanner
13 Oil bottle
W 450 SE
800 ml
Replaceable
hard metal
hard metal
10,5 m/s²
86 dB(A)
99 dB(A)