Siemens Motion 701 User Manual page 20

Functionalities
You can also select the telephone program

manually by using the program button.
When operating the hearing instrument in

telecoil mode, the wireless function may cause
a pulsing noise. This is due to the pick-up of the
transmission signal. When your hearing instru-
ment is in telecoil mode please use the remote
control only with a distance greater than 10 cm
(4 inches).
(*) AutoPhone magnet accessory
Not all telephones produce a magnetic field strong
enough to activate the AutoPhone function. In this case,
use the Siemens AutoPhone magnet, which is available
as accessory, and attach it to the telephone receiver to
activate the AutoPhone function.
See the AutoPhone magnet user guide for

instructions on how to position the magnet.
Use only the Siemens magnet. Ask your Hearing

Care Professional for this accessory.
20