Motorola T200 Service Manual page 37

T200 / T2688
The database file is a filename.bin configuration, and again is derived from the s/w version. (In this
case 701314.bin)
Selecting the Files option on the tool bar may change all the files.
Flashing Procedure STEP 1
After selecting the correct files, plug phone into cable but DO NOT power on. Then hit the download
button.
When you get to this point you have 10 seconds to power the phone on
If you don't power the phone on in the 10 seconds then DM Tools will see this as a flash fail.
Assuming no problems the following screen should be seen during the flashing procedure
Screen dump during flash
The flashing procedure also flexes the phone. At the end of the download the following screen can be
seen.
30 of 51 GSM Field Service Support