Table of Contents
Advertisement
Follow the instructions below to connect various
accessories
Connect the video cable from your display unit to the video port
Connect USB devices to the USB ports
Connect external speakers to the 16-Bit stereo output port
Connect your microphone to the Microphone input port
Connect your keyboard to the PS/2 Keyboard port
Connect your mouse to the PS/2 Mouse port
Connect your serial devices (E.g Modem) to the COM ports
Connect your printer to the parallel port
Optional: Insert the PC-Card (Type I, II or III) into the PC-Card slot
as described below:
1. Align the arrow-mark on the PC Card with the arrow-mark
adjacent to the PC-Card slot on the rear-panel of the client
2. Push the PC-Card into the slot until you feel the card latching
on to the connector
3. Connect one end of a PC-Card cable / dongle to the connector
on the PC-Card and the other end to the external source. The
client is now ready to use the PC-Card
Connect the output of the AC-DC Adapter to the inlet of the unit. There will be an audible click
indicating that the plug is securely in place.
C
AUTION
P
AND
ARALLEL PORTS
C
AUTION
,
UNIT
HOLD ONLY THE SPRING
D
O NOT HOLD THE POWER
Connector
Installation
: E
NSURE THAT THE SCREWS PROVIDED WITH
)
ARE FASTENED
: I
,
F FOR ANY REASON
YOU WANT TO DISCONNECT THE POWER
-
LOADED SHROUD
-
CORD ITSELF
Hold here while disconnecting
the power cord
D-
TYPE CONNECTORS
.
(
3)
SEE FIGURE
WHILE PULLING OUT THE CONNECTOR
.
Spring-loaded shroud
Figure 3
Hardware User's Guide
Connector Symbol
(see figure 2 – page 8
for the location of
connectors on the rear
panel )
or
1
2
(COM1, COM2, V
IDEO
-
CORD CONNECTED TO THE
Cord
,
;
9
Advertisement
Table of Contents
