I-O Corporation TC4000 User Manual page 23

Hardware User's Guide
Return-to-Depot Repair Policy
Terms, Conditions, and Limitations
a
Effective May 1, 1994
For products covered by the I-O Corporation (I-O) Manufacturer's Limited Warranty (International), I-O's
Return-to-Depot (RTD) Repair Policy provides customers with warranty service for a defective product,
subject to the following terms and conditions:
Call Customer Support
If a product fails, call I-O Customer Support for assistance at:
(801) 972-1446 for all locations outside the United States.
Verify Product Failure
I-O will verify the product serial number, warranty coverage and product failure.
You are responsible for assisting in verifying the product failure
When I-O Customer Support verifies a product failure they will issue a Return Merchandise Authorization
(RMA) number to authorize return of the failed product.
Select Your Preferred Repair Location
I-O's Customer Support Representative will assist you in identifying the nearest I-O authorized repair
depot.
I-O's Customer Support Representative will provide you with an RMA transmittal form referencing the
assigned RMA number and the authorized repair depot address.
Return Your Failed Unit
Return the failed product to the I-O authorized repair depot previously identified, enclosing the RMA
transmittal form. When you return the failed product it must be shipped freight prepaid.
I-O's RTD Repair Policy applies only to warranted product failures. Buyer guarantees payment for non-
warranted product repairs.
Install Your Repaired Unit
I-O's authorized repair depot will service the faulty unit and return it to you, freight prepaid.
You are responsible for installing the returned unit.
After receiving the repaired unit please call I-O Customer Support if any assistance is required.
a
I-O reserves the right to change the terms and conditions of this policy without notice.
Warranty 23