User Manual Smart Charger (15A) for 25.6V (8 cells) LiFePO4 Battery Pack (110V only, Standard AA Portable Power Corp (http://www.batteryspace.com) Address: 860 S, 19 St, Unit A, Richmond, CA, 94804 Tel: 510-525-2328 Fax: 510-439-2808 Email: Sales@batteryspace.com Prepared & Approved by Louis (01/10/08)
Page 2
WARNING Wiring precautions If failure or error of this instrument could result in a critical accident of the system, install a external protection circuit to prevent such an accident. In order to prevent instrument damage or failure, protect the power line and the input/output lines from high currents by using fuses with appropriate ratings.
Page 3
Introduction AA Portable Power Corp (http://www.batteryspace.com) specialized in the research & development of the intelligence battery charger in the long terms. The series battery charger is based on MCU technology, with pulse charging mode,the charging voltage has temperature compensation automatically .It could be used in the various electric cars the field of tourism, railway, mine, post and telecommunication .
Page 4
How to use 1. Turn on : Make sure the pack voltage is suitable for charger. Then connect to the pack with correct polarity. 2. Check the voltage of the AC input is suitable for the input voltage of the charger or not. 3 The charger start ramp charging after auto-testing in 1 minutes 4.