Integra DPS-10.5 Instruction Manual
  1. Manuals
  2. Brands
  3. Integra Manuals
  4. DVD Player
  5. DPS-10.5
  6. Instruction manual

Integra DPS-10.5 Instruction Manual

Super audio cd & dvd audio/video player
Hide thumbs Also See for DPS-10.5:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
Super Audio CD &
DVD Audio/Video Player
DPS-10.5
Instruction Manual
Downloaded From Disc-Player.com Integra Manuals

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DPS-10.5 and is the answer not in the manual?

Questions and answers

Related Manuals for Integra DPS-10.5

Summary of Contents for Integra DPS-10.5

  • Page 1 Super Audio CD & DVD Audio/Video Player DPS-10.5 Instruction Manual Downloaded From Disc-Player.com Integra Manuals...

  • Page 2: Important Safety Instructions

    Downloaded From Disc-Player.com Integra Manuals...

  • Page 3: Precautions

    Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from • that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Downloaded From Disc-Player.com Integra Manuals...

  • Page 4: For Canadian Model

    (e.g., AC THERE IS A DANGER OF SEVERE ELECTRICAL 120 V, 60 Hz). SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMPERE SOCKET. If in any doubt, consult a qualified electrician. Downloaded From Disc-Player.com Integra Manuals...
  • Page 5 • If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally. Downloaded From Disc-Player.com Integra Manuals...

  • Page 6: Table Of Contents

    Installing the Remote’s Batteries....15 Viewing a Slideshow of JPEG Images ..49 Using the Remote Controller...... 15 Making a Playlist with the Disc Navigator... 50 Getting to Know the DPS-10.5 ....16 Advanced Playback........52 Front Panel..........16 Zooming............52 Display ............
  • Page 7 Thank you for purchasing the Integra Important Safety Instructions..2 DPS-10.5 Super Audio CD & DVD Audio/ Video Player. Read this manual care- fully before using your new player. A good understanding of its features and Precautions ........3 operation will allow you to achieve opti- mum performance and enjoyment.

  • Page 8: Introduction

    LLC. The i.LINK logo is a trademark of Sony Corporation, regis- tered in the U.S. and other countries. Niles is a registered trademark of Niles Audio Corporation. Xantech is a registered trademark of Xantech Corporation. Downloaded From Disc-Player.com Integra Manuals...

  • Page 9: Supplied Accessories

    DPS-10.5’s power cord. (Adapter varies from country to i.LINK cable country.) * In catalogs and on packaging, the letter added to the end of the product name indicates the color of the DPS-10.5. Specifications and operation are the same regardless of color. AV cable (RCA) S-Video cable Downloaded From Disc-Player.com Integra Manuals...

  • Page 10: Disc Notes

    DVD-Audio DVD-Audio made labels or stickers. Doing so may damage the DPS-10.5 and you may not be able to remove the disc Super Audio CD (sin- properly. SACD gle layer, dual layer,...
  • Page 11 ■ SACD Disc Navigator. SACDs have two separate areas for storing audio • The DPS-10.5 supports up to 999 folders and up to tracks—one for multichannel audio, the other for 2- 672 files. channel stereo audio. In addition, hybrid SACDs •...

  • Page 12: Cleaning Discs

    ■ JPEG Copyright JPEG discs contain pictures organized into folders. On the DPS-10.5, JPEG files as handled as tracks. It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted material Folder 1 Folder 2 without permission.

  • Page 13: Terminology

    CDs. PCM stands for Pulse Code that can be recorded only once. Can be used for Modulation. DVD-Video or DVD-Audio. ■ MP3 (MPEG 1 Audio Layer 3): Popular com- pressed file format for storing digital music. Downloaded From Disc-Player.com Integra Manuals...
  • Page 14 ■ VCD (Video CD): The format for storing MPEG1 video on CD. ■ VLSC (Vector Linear Shaping Circuitry): Unique Onkyo circuitry that reduces pulse noise in ana- log audio signals converted from digital sources. Downloaded From Disc-Player.com Integra Manuals...

  • Page 15: Before Use

    Before Use Installing the Remote’s Batteries Using the Remote Controller To use the remote controller, point it at the DPS-10.5’s To open the battery compartment, press remote control sensor, as shown below. the small hollow and slide off the cover.

  • Page 16: Getting To Know The Dps-10.5

    These indicators show the currently selected video is set to Standby. input source: DVD or External. Standby/On button (38) Disc tray (41) This button is used to set the DPS-10.5 to On or Discs are loaded onto the disc tray. Standby. Open/Close button (41) Display This button is used to open and close the disc tray.

  • Page 17: Display

    DVD-Audio disc is displayed here. During IEEE 1394 indicator playback, the number of the current group is dis- This indicator appears when the DPS-10.5 is prop- played. erly connected to an i.LINK (IEEE 1394) compo- PBC indicator nent.

  • Page 18: Rear Panel

    Getting to Know the DPS-10.5—Continued DPS-10.5’s Dolby Pro Logic decoder is on. The JPEG indicator DTS indicator appears when a DTS soundtrack is This indicator appears while a JPEG picture is being selected. displayed. DVD-AUDIO & SACD VCD indicators MP3 indicator These indicators show the type of disc loaded.
  • Page 19 IR receiver, which can be used to pickup signals from the remote controller when the DPS-10.5 is located in another room, installed in a rack, or is out of range of the remote controller The IR OUT connector can be used to connect a...

  • Page 20: Remote Controller

    The DPS-10.5’s remote controller is a multipurpose This indicator lights up when the remote controller device that can be used to control not just the DPS-10.5 is transmitting commands. It’s also used when con- but an Integra AV receiver, TV, and VCR. This section figuring the remote controller for use with a TV or...
  • Page 21 This button is used to turn off all of the internal video circuitry for pure audio playback. Video Input button (62) This button is used to select the video input source: DVD (the DPS-10.5) or External (S-Video input or composite video input). Open/close [ ] button (41) This button is used to open and close the disc tray.
  • Page 22 In Amp mode, the remote controller can be used to con- This button is used to set the AV receiver to trol an Integra AV receiver connected to the DPS-10.5 Standby. . To select Amp mode, press the [Amp] Mode Amp Mode button button.

  • Page 23: Connecting

    Connecting RCA AV Connection Color Coding This chapter explains how to connect the DPS-10.5 to your other AV components. RCA-type AV connections are usually color coded: red, white, and yellow. Use red plugs to connect right-chan- Before Making Any Connections nel audio inputs and outputs (typically labeled “R”).

  • Page 24: Video Formats & Dps-10.5 Inputs & Outputs

    Video Formats & DPS-10.5 Inputs & Outputs The DPS-10.5 supports several video input formats. The following table shows what’s output by each video output when each of the video inputs is selected. It also shows whether or not the video is upconverted to progressive video.

  • Page 25: Audio Formats & Dps-10.5 Outputs

    Connecting—Continued Audio Formats & DPS-10.5 Outputs The DPS-10.5 supports many digital audio formats. The following table shows which outputs work with each format. DPS-10.5 audio output DIGITAL 1 & 2 FRONT, SURR 1, CENTER, D.MIX Disc type Audio format HDMI OUT i.LINK...

  • Page 26: Getting Connected

    Connecting—Continued Getting Connected If you’re not sure how to connect the DPS-10.5 to your other components, check what type of sockets they have and use the following map to locate the appropriate hookup information. ▼ Video Output Connections ▼ Components with an HDMI input - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - page 28 (E) ▼...

  • Page 27: Connecting A Standard Tv

    Connecting—Continued B. Using S-Video Connecting a Standard TV This section shows how to connect the DPS-10.5 to a standard TV, in which the TV handles both the video and audio. If your TV has a Dolby Pro Logic decoder built- in, you’ll be able to enjoy DVDs that bear the Dolby Sur-...

  • Page 28: Connecting An Hdtv Or Projector

    D. Connecting an HDTV or Projector HDMI Input This section shows how to connect the DPS-10.5 to an This section shows how to connect the DPS-10.5 to a AV HDTV (plasma, LCD) or projector. receiver, HDTV, or projector that has an HDMI input Use a commercially available component video cable socket.

  • Page 29: Audio Formats

    Resolutions supported by the connected TV can be selected by (supplied) pressing the [Resolution] button (see page 62). On the DPS-10.5, you can select a resolution suitable for use with the connected HDTV or projector (see page 62). ■ Audio Formats The DPS-10.5’s HDMI OUT supports the following...

  • Page 30: Connecting An Av Receiver's Video Inputs

    G. Using S-Video Connecting an AV Receiver’s video Inputs This section shows how to connect the DPS-10.5’s video outputs to an AV receiver’s video inputs. Component video offers the best picture quality, so if your AV receiver supports it, use a commercially avail- able component video cable to connect the DPS-10.5’s...

  • Page 31: Connecting I.link-Compatible Components

    • Make sure that the i.LINK plugs are fully inserted. Components • Don’t disconnect any i.LINK cables while the This section shows how to connect the DPS-10.5 to an DPS-10.5 is on. i.LINK-compatible component, such as an AV receiver. • A short circuit may occur if the metallic part of an i.LINK plug comes into contact with the DPS-10.5’s...

  • Page 32: Connecting To An Av Receiver's Audio Inputs

    Use an optical or coaxial digital audio cable to connect i.LINK will not work if any of the connections form a one of the DPS-10.5’s DIGITAL 1 or DIGITAL 2 out- loop, as shown below. puts (OPTICAL or COAXIAL) to a corresponding digi- tal audio input on your AV receiver, as shown.
  • Page 33 FRONT SURR 1 CENTER SURR 2 must make an analog audio connection in order to select the DPS-10.5 as the input source for Zone 2. • Make sure that the digital output (Digital 1 Out or Dig- WOOFER ital 2 Out) is set to Dolby Digital (see page 70). Oth- AUDIO OUT erwise you won’t get surround sound.

  • Page 34: Connecting A Stereo Amp

    Connecting a Stereo Amp Use an optical or coaxial digital audio cable to connect This section explains how to connect the DPS-10.5 to a one of the DPS-10.5’s DIGITAL 1 or DIGITAL 2 out- stereo hi-fi amp or receiver for sound quality better than puts (OPTICAL or COAXIAL) to a corresponding digi- that provided by most TVs.

  • Page 35: Connecting Standard Video Equipment For Progressive Upconversion

    flicker. Upconversion • The S-Video VIDEO IN has priority. If there’s no sig- nal present at that input, the DPS-10.5 uses the com- If your TV supports progressive scanning, you can con- posite video input.

  • Page 36: Connecting Components With

    Controlling the DPS-10.5 When It’s Out of Range D. MIX If the DPS-10.5 is located in another room, installed in a cabinet, or is out of range of its remote controller, you REMOTE CONTROL OPTICAL...

  • Page 37: Connecting The Power Cord

    • The DPS-10.5 is shipped with the Standby/On button in the On position ( ). When the power cord is con- nected for the very first time, the DPS-10.5 will go on IR receiver standby and the Standby indicator will light up.

  • Page 38: Turning On The Dps-10.5

    Press the [Standby/On] button. The display light ups and the Standby indicator goes off. The very first time you turn on the DPS-10.5, the Initial Setup menu appears onscreen (see page 39). Press the [Standby/On] button again to enter Standby.

  • Page 39: Initial Setup

    Audio Subtitle Angle Resolution First Time Setup The very first time you turn on the DPS-10.5, the Initial Setup menu appears onscreen. Use the Up and Down [ buttons to select Off or On for the i.LINK Output Setting (i.LINK), and then press [Enter].
  • Page 40 On (default): Select if a subwoofer is used. being used. • When the DPS-10.5 is plugged in and set to Standby, it automatically checks if it’s connected to any other i.LINK components. If it is, the default setting for the Use the Left and Right [ i.LINK Output Setting becomes On.

  • Page 41: Basic Playback

    DVD-VR JPEG Notes: • The disc tray can be opened even while the DPS-10.5 This section explains how to load discs. is on Standby, so you don’t have to turn it on to remove a disc. (The disc tray will take slightly longer to open.) Press the Open/Close [ •...

  • Page 42: Starting, Pausing & Stopping Playback

    This section explains how to start, pause, and stop (see page 59). playback. • Do not move the DPS-10.5 or subject it to vibration ■ Start during playback. Doing so may damage the disc and To start playback, press the Play the DPS-10.5.

  • Page 43: Navigating Disc Menus

    ] and Previous [ buttons, or the remote controller’s number buttons to select tracks on a VCD. • PBC menus can be hidden or displayed while play- back is stopped by pressing the [Top Menu] button. Downloaded From Disc-Player.com Integra Manuals...

  • Page 44: Selecting Chapters & Titles By Number

    • DVD-Video discs usually have menus for selecting titles and chapters (see page 43). • With some discs you may not be able to select titles and chapters by number. Downloaded From Disc-Player.com Integra Manuals...

  • Page 45: Selecting Tracks By Number

    • If PBC is on (see page 80), and the currently playing VCD supports it, you may be able to select tracks from Total number of tracks a menu (see page 43). Current track • You can’t use the [Search] function during random playback. Downloaded From Disc-Player.com Integra Manuals...

  • Page 46: Fast Forward & Reverse

    To prevent this, don’t display the same VCD, CD, and MP3. frame for too long. The DPS-10.5 features a screen • No sound is output during fast forward or reverse of a saver to protect your TV from the effects of burn-in DVD-Video disc or VCD.

  • Page 47: Slow-Motion Playback

    To change the slow-motion speed, press the Step/Slow Back [ ] button repeatedly to cycle through the speeds: Reverse Slow1, Reverse Slow2, and so ■ Resume To resume normal playback, playback press the Play [ ] button. Remote controller Downloaded From Disc-Player.com Integra Manuals...

  • Page 48: Navigating Mp3 Discs

    Pressing the Play [ ] button at this point will play all tracks in all folders in hierarchical order. The DPS-10.5 numbers folders and Playlist number tracks in hierarchical order. You can use Subsequent tracks in the same folder these numbers to select folders and are played in order.

  • Page 49: Viewing A Slideshow Of Jpeg Images

    Pause [ ] button. Press the Play [ ] hierarchical order. Enter button to resume. The DPS-10.5 numbers folders and To start a slideshow consisting of all of files in hierarchical order. the images in a folder, select the folder...

  • Page 50: Making A Playlist With The Disc Navigator

    Folder list Track list Play List some MP3 tracks, the DPS-10.5 will play those tracks while showing the slideshow. • If the selected JPEG file’s resolution is 640 x 480 pix- els or less, a thumbnail-size preview is shown. If the resolution exceeds 640 x 480, a preview will only be shown if the file contains thumbnail data.
  • Page 51 Track list except the Remote controller top folder and press the Play [ button. To close the Disc Navigator Play List window, press the [Memory] button. To stop the playlist, press the Stop [ ] button. Remote controller Downloaded From Disc-Player.com Integra Manuals...

  • Page 52: Advanced Playback

    • Time search may not work with some discs. Zoom On • Time search cannot be used while a DVD-Video menu is displayed onscreen, or while a VCD that supports PBC is playing. • The [Search] button cannot be used during random playback. Downloaded From Disc-Player.com Integra Manuals...

  • Page 53: Repeat Playback

    • In some cases, the A and B points may be at slightly different points to the ones that you specify. • If you select a different camera angle during A–B repeat playback, the original camera angle will be selected when playback restarts from the A point. Downloaded From Disc-Player.com Integra Manuals...

  • Page 54: Random Playback

    • You can’t use the [Search] button during random play- back. • During random playback, the remote controller’s arrow [ ], [ ], [ ], [ ] buttons don’t work with the Disc Navigator. Downloaded From Disc-Player.com Integra Manuals...

  • Page 55: Memory Playback

    Right [ ]/[ ] buttons to select the The Memory Play Setup window must parameters, and use the Up and Down be open when you press the Play [ ] [ ]/[ ] buttons to select numbers from button. 001 to 999. Downloaded From Disc-Player.com Integra Manuals...
  • Page 56 Remote controller ory List. Enter Notes: • The playlist is deleted when the DPS-10.5 is set to Standby. Deleting Items from the Memory List • To use this function with a VCD that supports PBC, you must first turn off PBC (see page 80).

  • Page 57: Selecting Camera Angles

    Advanced Playback—Continued Changing Items in the Memory List Notes: • The playlist is deleted when the DPS-10.5 is set to Standby. Press the [Memory] button. • To use this function with a VCD that supports PBC, The Memory Play Setup window Remote controller you must first turn off PBC (see page 80).

  • Page 58: Selecting Soundtracks

    Mono L (left) or Mono R (right) channel. See the disc’s sleeve notes for details. • With some DVDs you need to select soundtracks from a menu, and you may not be able to select other soundtracks during playback. Downloaded From Disc-Player.com Integra Manuals...

  • Page 59: Last Memory

    Play [ ] button. back from where you left off even if the disc has been removed and the DPS-10.5 has been set to Standby. Last Displaying Information Memory also remembers the soundtrack and subtitle set- tings you were using.
  • Page 60 3rd press disc time, total disc time. Title, artist name, album name. Disc title 4th press 5th press No display Elapsed track time If the disc has no title, “No Title” appears. Downloaded From Disc-Player.com Integra Manuals...
  • Page 61 • When playback is started, paused, stopped, and so on, the status is displayed onscreen for five seconds. • For DVD-VR discs, the bit rate is not displayed. • No information is displayed when playing a VCD with PBC. Downloaded From Disc-Player.com Integra Manuals...

  • Page 62: Turning Off The Video Circuits

    • With some discs you need start playback from a menu, Notes: in which case you should turn off the video circuitry • With HDMI, the TV reports to the DPS-10.5 what res- after starting playback. olutions it supports, and then only those resolutions •...

  • Page 63: Setting The Picture's Aspect Ratio

    Advanced Playback—Continued Notes: • The aspect ratio cannot be changed during playback. Standby • When the DPS-10.5 is set to Standby, the aspect ratio Input reverts to the TV Shape setting (see page 68). T V CH T V VOL...

  • Page 64: Configuring The Dps-10.5

    Interlaced Setting Picture adjustments for interlaced scanning. Progressive Setting Picture adjustments for progressive scanning. PAL Output Setting (Australian model Specify how the DPS-10.5 outputs video signals when only) playing NTSC discs. Dolby Digital Out Determines whether Dolby Digital audio is downmixed.
  • Page 65 Auto power off Sets the Auto power off function. TV Shape On-Screen Language Initial Setup i.LINK Output Setting This is the menu that appears automatically the very first time the DPS-10.5 is turned on. 2 Channel Analog Audio Multi Speaker Channel Setting Downloaded From Disc-Player.com Integra Manuals...

  • Page 66: Using The Onscreen Setup Menus

    The settings are stored and the onscreen This section explains how to use the onscreen setup setup menu closes. menus. Turn on the DPS-10.5 and your On your TV, select the video input to which the DPS-10.5 is connected. Press the [Setup] button.
  • Page 67 Configuring the DPS-10.5—Continued The following diagram shows how to navigate the onscreen setup menus. Downloaded From Disc-Player.com Integra Manuals...

  • Page 68: Picture Menu

    On the North American model, the options are Normal and used. Dark. The effect may not always be noticeable, and depending on the video source, the picture may look better with it set to Off. Downloaded From Disc-Player.com Integra Manuals...
  • Page 69 Press the [Enter] button. The setting is stored. Remote controller Use the same procedure to set the other parameters, pressing the [Enter] button when you’ve set each one. Press the [Setup] button to exit the onscreen setup menu. Downloaded From Disc-Player.com Integra Manuals...

  • Page 70: Audio Menu

    DTS decoder. PAL Output Setting (Australian model only) DTS > PCM With this setting you can specify how the DPS-10.5 out- Choose this option if you’re connecting a stereo hi-fi discs puts video signals when playing NTSC format amp with a digital input or an external D/A converter.

  • Page 71: Digital Out

    MPEG Notes: Choose this option if you’re connecting a component • When the DPS-10.5 is plugged in and set to Standby, with a built-in MPEG decoder. it automatically checks if it’s connected to any other MPEG > PCM (default) i.LINK components.
  • Page 72 • Speaker Setting • Speaker Distance • Test Tone ■ Dolby Pro Logic Setting This setting determines how the DPS-10.5’s built-in Dolby Pro Logic decoder works with 2-channel material. Auto (default) The Dolby Pro Logic decoder automatically detects and decodes only Dolby Surround material.
  • Page 73 [Enter] button, use the Left and Right [ ] buttons to select an option, and then press Enter the [Enter] button. Off: Select if no subwoofer is being used. On (default): Select if a subwoofer is being used. Downloaded From Disc-Player.com Integra Manuals...
  • Page 74 When the Speaker Distance is set to menu. Off, these settings cannot be selected. Note: • The Speaker Distance settings have no effect on SACD (multichannel area and 2-channel area) and 192 kHz/176.4 kHz DVD-Audio. Downloaded From Disc-Player.com Integra Manuals...
  • Page 75 The parameters appear onscreen. are set to Off. When you’ve finished, press the [Setup] button to exit setup, or Remote controller press the Left [ ] button repeat- edly to go back to the main setup menu. Downloaded From Disc-Player.com Integra Manuals...
  • Page 76 CD players. 0–100 ms 50 ms With this setting you can determine how SACDs are 50 ms played by the DPS-10.5. 2 ch Area tracks The 2-channel stereo audio are played. Multi ch Area (default)

  • Page 77: Language Menu

    • Even if a DVD has subtitles in multiple languages, this setting may not always work. • If a DVD has only one subtitle language, that will be used. • With some DVDs you can select subtitles from a menu. Downloaded From Disc-Player.com Integra Manuals...

  • Page 78: Display Menu

    Once the screen saver has been activated, you can cancel it by pressing either the Play [ ] or Pause [ ] button. Notes: • The Screen Saver also works with DVD-Audio, SACD, CD, MP3, and JPEG discs. Downloaded From Disc-Player.com Integra Manuals...

  • Page 79: Parental Lock

    With this setting you can turn on or off the beeper that Remote controller The Level box appears onscreen. confirms the successful reception of commands from the remote controller. Off (default) Beeper off. + 10 Beeper on. Downloaded From Disc-Player.com Integra Manuals...

  • Page 80: Initial Setup Menu

    Auto power off function off. Auto power off function on. Initial Setup Menu This menu appears automatically the very first time the DPS-10.5 is turned on. See “First Time Setup” on page 39 for more information. Downloaded From Disc-Player.com Integra Manuals...

  • Page 81: Language Code List

    Shona Finnish Somali Fiji Albanian Faroese Serbian Frisian Siswati Irish Sesotho Scots-Gaelic Sundanese Galician Swahili Guarani Tamil Gujarati Telugu Hausa Tajik Hindi Thai Croatian Tigrinya Hungarian Turkmen Armenian Tagalog Interlingua Setswana Interlingue Tonga Inupiak Turkish Downloaded From Disc-Player.com Integra Manuals...

  • Page 82: Controlling Other Components

    Controlling Other Components In addition to controlling the DPS-10.5, the remote con- Use the number buttons to enter troller can also be used to control your TV and VCR. To the 4-digit remote control code. do this you need to enter the appropriate control codes...

  • Page 83: Remote Control Codes

    1007, 1012, 1013, 1015, Philips 1014, 1018, 1019, 1020, Daytron 1004, 1006, 1025, 1035 1033 1037, 1038, 1040, 1053 Decca 1067 Kaisui 1035, 1063 Phoenix 1040 Dimensia 1001, 1034 Kapsch 1062, 1069 Phonola 1037, 1040 Downloaded From Disc-Player.com Integra Manuals...
  • Page 84 2047 1036, 1040, 1043, 1067, Sinudyne 2013, 2021, 2025, 2028, 1068 Hitachi 2037, 2038, 2043 Solavox 1062 Ingersol 2028 Sonoko 1035 Interfunk 2034 Sonolor 1062 2030, 2036, 2043, 2048 1002, 1030, 1032, 1036, Sony 1054 Downloaded From Disc-Player.com Integra Manuals...
  • Page 85 2017, 2021, 2027 2034 XR-1000 2010, 2012 Quasar 2010, 2011 Yamaha 2005, 2006, 2007, 2009 Quelle 2034 Yoko 2043 Radio Shack 2017 Zenith 2004, 2019, 2024 Radio Shack/ 2007, 2008, 2010, 2011, Realistic 2012, 2017 Downloaded From Disc-Player.com Integra Manuals...
  • Page 86 Adjusts the TV’s volume VOL [ [Rec] Used to start recording [Muting] Mutes the TV *Buttons marked with an asterisk can be used to control a TV regardless of the currently selected remote controller mode. Downloaded From Disc-Player.com Integra Manuals...

  • Page 87: Learning The Commands Of Other Remote Controllers

    The previously learnt RC-563DV command will be overwritten. • Like most remote controllers, the DPS-10.5’s remote controller uses infrared. Commands from remote con- trollers that don’t use infrared cannot be learnt. While holding down the [DVD], [Amp], [VCR], or [TV] Mode button, press the [On] •...

  • Page 88: Deleting The Learnt Commands Of One Mode

    1. Notes: Notes: • Learning mode is cancelled automatically if you don’t • Learning mode is cancelled automatically if you don’t press any buttons for 30 seconds. press any buttons for 30 seconds. Downloaded From Disc-Player.com Integra Manuals...

  • Page 89: Troubleshooting

    DPS-10.5 off automatically after 20 minutes of as required (page 80). used? inactivity. On your TV, select the input to which the DPS-10.5 The wrong input source is selected on your TV. is connected (pages 27, 28). Check the video cable and correct as necessary No picture? The video cable is not connected properly.
  • Page 90 ■ Restoring the Default Settings To reset the DPS-10.5 to its factory defaults, turn it on and, while holding down the Stop [ ] button, press the [Standby/On] button. “Initialize” appears on the display. When the reset is complete, “Complete” is displayed, and the DPS-10.5 enters Standby mode.

  • Page 91: Specifications

    (Video Mode/VR mode), Music CD/CD-R/RW, Video CD, MP3, JPEG Disc Compatibility Disc that has not been property finalized may only be partially play- able or not playable at all. Specifications and features subject to change without notice. Downloaded From Disc-Player.com Integra Manuals...
  • Page 92 Sales & Product Planning Div.: 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN I0405-1 Tel: 072-831-8023 Fax: 072-831-8124 SN 29343659 (C) Copyright 2004 ONKYO CORPORATION Japan. All rights reserved. Downloaded From Disc-Player.com Integra Manuals * 2 9 3 4 3 6 5 9 *...

Table of Contents