Built-In Safety Features / Parts And Accessories - TriStar PPC770 Owner's Manual

1. Lid Safety Device: Prevents pressure build-up if
lid is not closed properly and prevents lid from
opening until all pressure is released.
2. Pressure and Temperature Sensor Controls:
Maintain even heat
automatically activating or deactivating the
power supply.
3. "Back-up" Safety Release Valve: Should
the Temperature/Pressure
malfunction, causing
beyond maximum setting, the "Back-Up" will
automatically "kick in" and release the built
up pressure.
4. "Clog Resistant" Feature: Prevents food from
blocking the steam release port.
IMPORTANT: Your Power Pressure Cooker XL
shown above. Check everything carefully before use. If any part is missing or damaged do
not use this product and contact shipper using the customer service number located on the
back cover of the owner's manual.
Built-In Safety Features
and pressure
Sensor device
pressure to build
Power Pressure Cooker XL PARTS & ACCESSORIES
has been shipped with the components
TM
5. "Spring-Loaded" Safety Pressure Release:
Should all safety features listed above fail, this
"spring-loaded" device located beneath the
heating element will automatically lower the
Inner Pot, causing it to separate automatically
by
from the Rubber Gasket. This will enable
the steam and pressure to automatically
escape around the pot Lid, avoiding a
dangerous situation.
6. Temperature "Cut-Off" Device: Should the
unit malfunction and cause the internal
temperature to rise beyond the "Safe" limit,
this device will cut-off the power supply and
will not automatically reset.
Ladle
Condensation
Collector
Steamer Tray
Canning Rack