Specifications - Kubota D1005-E3BG Operator's Manual

26

SPECIFICATIONS

SPECIFICATIONS
Model
Type
Number of cylinders
Bore and stroke
Total displacement
Combustion chamber
SAE Continuous
H.P. (SAEJ1349)
SAE Stand-by
H.P. (SAEJ1349)
Maximum bare speed
Order of firing
Direction of rotation
Injection pump
Injection pressure
Injection timing (Before T.D.C.)
Compression ratio
Fuel
Lubricant
(API classification)
Dimension
(length × width × height)
Dry weight
(BB Spec.)
Starting system
Starting motor
Charging generator
Recommended battery capacity
A Model EBG1 is 1800rpm for 60Hz, EBG2 is 1500rpm for 50Hz.
A Flywheel type is SAE clutch No. 6-1/2 or its equivalent.
A Flywheel housing type is SAE No. 5 or its equivalent.
A Governor drop is within 5%
A Continuous will operate at the stated rating continuously and have a 10% overload capability for one hour in 12
hours.
A Standby will operate at the stated full rating for one hour in 12 hours. No overload capacity is specified for this rating.
A Specifications are subject to change without notice.
D1005-E3BG1
Vertical, water-cooled, 4-cycle diesel engine
mm (in.)
cm (cu.in.)
kW / rpm
(HP / rpm)
kW / rpm
(HP / rpm)
rpm
Counter-clockwise (viewed from flywheel side)
mm (in.)
kg (lbs.)
3
76 × 73.6 (2.99 × 2.90)
1001 (61.08)
Spherical Type (E-TVCS)
8.7/1800
(11.7/1800)
9.8/1800
(13.1/1800)
1890
1-2-3
Bosch MD Type Mini Pump
140 kgf/cm (13.73 MPa, 1991 psi)
16.5°
24 : 1
Diesel Fuel No.2-D (ASTM D975)
above CF grade
551.3 × 396 × 602
(21.7 × 15.6 × 23.7)
110
(242.5)
Cell starter (with glow plug)
12 V, 1.0 kW
12 V, 360 W
12 V, 65 AH, equivalent
D1005-E3BG2
7.2/1500
(9.7/1500)
8.2/1500
(11.0/1500)
1575
15.5°