Dhcp Server - Fritz! BOX Fon WLAN 7140 Installation, Configuration And Operation

DHCP Server

9.3 DHCP Server
60 FRITZ!Box Fon WLAN – 9 Network Settings
VoIPon www.voipon.co.uk
5. Make the changes on the "IP Settings" page and then
click "Apply".
FRITZ!Box Fon WLAN is equipped with its own DHCP server.
The DHCP server is enabled by default in the factory settings.
Every time the operating system on a computer connected
with FRITZ!Box Fon WLAN is started, it is assigned an IP ad-
dress by the DHCP server.
Only one DHCP server may be active within any network.
Factory Settings
All computers are located in the same IP net-
work
IP address
Subnet mask
DHCP server
The IP address, the corresponding subnet mask and the acti-
vated DHCP server automatically yield the following values:
Network address of the subnet
Entire IP address pool for the
computers
Address pool of the DHCP server: 192.168.178.20 - 200
In every subnet of the FRITZ!Box Fon WLAN, the addresses 20
through 200 in the fourth group of numerals of the IP ad-
dress are reserved for the DHCP server.
Assigning the IP addresses via the DHCP server ensures that
all of the computers connected with the FRITZ!Box Fon WLAN
are located in a single subnet.
The computers can receive their IP addresses from the DHCP
server only if the setting "Obtain an IP address automatical-
ly" is enabled in the their IP settings. For more information,
see the section "IP Settings" from page 72.
sales@voipon.co.uk
192.168.178.0
192.168.178.2 - 192.168.178.253
Tel: +44 (0)1245 808195
enabled
192.168.178.1
255.255.255.0
enabled
Fax: +44 (0)1245 600030