Enabling And Disabling Product Selector View; Enabling And Disabling Products - Jura IMPRESSA XJ9 Professional Instructions For Use Manual

Enabling and disabling
product selector view
T Press the
'Save'
'Saved' appears briefly on the display.
'Product settings ( / )'
O T Press the P button to exit programming mode.
'Please select product:'
One-off settings cannot now be made during preparation.
In the programme item
you can make the following setting:
U
'Active'
U
Product selector view is active and can be started by turning
the Rotary Switch g when the IMPRESSA is ready for use.
U
'Inactive'
U
Product selector view is inactive.
Example: Proceed as follows to disable product selector view.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status ( / )'
g T Turn the Rotary Switch until the programme item
settings ( / )'
T Press the 'product selector'
'product selector'
T Press the
'Inactive'
T Press the 'Save'
'Saved' appears briefly on the display.
'Product settings ( / )'
O T Press the P button to exit programming mode.
'Please select product:'
Product selector view can now no longer by started by tur-
ning the Rotary Switch.
Permanent settings in programming mode
button.
'Product settings ( /
is displayed.
is displayed.
button.
button.
button.
)' / 'product selector'
'Product