Yamaha CP4 Stage Reference Manual page 34

"All" or "All without Sys" selected as load type:
The following screenshots illustrate how, for example, data can be loaded using the "All" load type.
02: Load selected in Step 2:
File and load type selected in Step 3:
Confirmation popup
Load
This shows that you are on the Load screen.
Cursor ( )
The flashing cursor indicates the parameter currently selected for editing.
File
This parameter is used to select the file to be loaded. Only All-type files located in the USB flash-
memory device's root directory can be selected here. If necessary, move the flashing cursor ( ) to
the setting underneath File using the [ ] button. Then, use the [-1/NO] and [+1/YES] buttons or the
Data Dial to select the required file.
Type
This parameter is used to specify a load type — that is, which data from the selected file ( ) to load
into the instrument. Move the flashing cursor ( ) to the setting underneath Type using the [ ]
button, and then use the [-1/NO] and [+1/YES] buttons or the Data Dial to specify the load type.
Are you sure?
This message is displayed before executing the Load function. Press the [+1/YES] button to load
the selected data. Alternatively, press the [-1/NO] button to return to the previous screen. To cancel
loading, press the [EXIT] button while the "Now loading..." message is displayed.
34 CP4 STAGE/CP40 STAGE Reference Manual
Press the [ENTER] button.
Press the [ENTER] button.
Design of the CP4 STAGE & CP40 STAGE
Reference
Performances
Editing Performances
Common Edit Area
01: Chorus Effect
02: Reverb Effect
03: General
04: Name
Part Edit Area
01: Play Mode
02: Filter/EG
03: Effect-A
04: Effect-B
05: Controller
06: Receive Switch
Master Keyboard Area
Job Area
01: Recall
02: Copy
03: Bulk
Store Performance Function
Compare Performance Function
File Area
01: Save
02: Load
03: Rename
04: Delete
05: Format
06: Memory Info
Utility Area
01: General
02: MIDI
03: Controller
04: MasterComp
05: Master EQ
06: Panel Lock
Utility Job Area
01: Factory Set
02: Version
Appendix