Standard Vehicular Charger (344A4616P1); Enhanced Vehicular Charger (344A4616P2); Enhanced Vehicular Charger (344A4616P2) With Remote Control Unit - Ericsson M-RK Installation & Operator's Manual

Standard Vehicular Charger (344A4616P1)

To operate the Standard Vehicular Charger, place the M-RK radio into
the charger and turn the rotary knob clockwise until it locks into position
(see Figures 2 & 3 ). The CHRG LED should light to indicate that the
battery is charging. When the battery is fully charged, the CHRG LED
will turn off and the RDY LED will turn on. At this time, the button in the
center of the rotary knob may be pressed to unlock the radio from the
charger, and the radio may be removed.
When the radio is in the charger, the Vehicular repeater
is automatically disabled, regardless of the position of
the repeater switch on the front of the charger. The radio
may not be operated when it is in the charger.

Enhanced Vehicular Charger (344A4616P2)

To operate the Enhanced Vehicular Charger, place the M-RK radio
into the charger and turn the rotary knob clockwise until it locks into
position (see Figures 2 & 3). The CHRG LED should light to indicate that
the battery is charging. When the battery is fully charged, the CHRG LED
will turn off and the RDY LED will turn on. At this time, the button in the
center of the rotary knob may be pressed to unlock the radio from the
charger, and the radio may be removed.
When the radio is in the charger, it may be operated as normal, except that
the separate speaker and microphone must be used.
When the radio is in the charger, it may be operated as
normal, except that the separate speaker and microphone
must be used.

Enhanced Vehicular Charger (344A4616P2) with Remote Control Unit

To operate the Enhanced Vehicular Charger, place the M-RK radio
into the charger and turn the rotary knob clockwise until it locks into
position (see Figure 2 & 3). Turn on power to the control head and then
NOTE
NOTE
9