Konica Minolta DiMAGE X1 Firmware Update Manual page 7

Camera firmware ver.1.10

Hide thumbs Also See for DiMAGE X1:

5. The updating-completed message appears.

Turn the camera off.

6. Turn the camera on by pressing the main switch, to

confirm the firmware version.

7. Check that the camera firmware version number

has changed to "Ver.1.10". (See the "Checking the

camera firmware version")

•

If the original firmware version number remains dis-

played or an error occurs during updating proce-

dure, turn the camera off and repeat (1) to (7).

8. Press the center button of the controller to close

the window.

After updating, perform 'Reset default' as follows:

9. Press the left/right keys of the controller to highlight

the set up tab 3, and press the up/down keys of the

controller to highlight "Reset default" option.

Highlight "Enter" option and press the center button

of the controller to enter.

How to update firmware