Module Configuration - B&B Electronics GW-7472 User Manual

4.2 Module Configuration

1. Double click the GW-7472 Utility shortcut on the desktop.
Click the "Network Scan" button to search your GW-7472.
2.
Select the item of the GW-7472 and click the "Configure" button to open the
3.
Configuration dialog.
Item Descriptions:
Item
Network Settings
Port Settings
Modbus Request Command
Note!!
All settings will take effected after rebooting the system of the GW-7472 module
GW-7472 User Manual, Version 1.0, Dec 2010
For configuration of the
Subnet Mask and Default Gateway of the GW-7472
Please refer to section "4.2.1 Network Settings"
For configuration of the
, of the RS-485/RS-422 port of the GW-7472
Stop Bits
Please refer to section "4.2.2 Serial Port Settings"
Modbus commands to communicate with the Modbus
slaves
Please refer to section "4.2.3 Modbus Request Settings"
Description
Address Type, Static IP Address,
,
Baud Rate Data Sizes
, ,
Parity
--- 26