Specification; Electrical Specification - LG 26LH20R Service Manual

NOTE : Specifications and others are subject to change without notice for improvement.
1. Application range
This spec sheet is applied to LCD TV used LP91A chassis.

2. Specification

Each part is tested as below without special appointment.
1) Temperature : 25±5ºC (77±9ºF), CST : 40±5ºC
2) Relative Humidity : 65±10%
3) Power Voltage : Standard input voltage(100~240V@50/60Hz)
* Standard Voltage of each products is marked by models.
4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
5) The receiver must be operated for about 5 minutes prior to
the adjustment.

4. Electrical specification

4.1 General Specification
No Item
1 Screen Size
2 Aspect Ratio
3 LCD Module
4 Operating Environment
5 Storage Environment
6 Input Voltage
7 LDC Module
(Maker : LGD)
Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
SPECIFICATION
Specification
26" wide Color Display Module
16:9
26" TFT WXGA LCD
Temp.: 0 ~ 40 deg
Humidity : 0 ~ 80 %
Temp.: -20 ~ 60 deg
Humidity : 0~ 85 %
AC100-240V~, 50/60Hz
≤ 120 W
26" HD
HD 626 x 373 x 44.1
0.1405 x 0.4215
12 EEFL
Coating
3. Test method
1) Performance: LGE TV test method followed
2) Demanded other specification
- Safety: CE, IEC specification
- EMC : CE, IEC
Measurement
Resolution: 1366*768
HD
with inverter
3H
- 6 -
Remark
LGE Internal Use Only