automatically), PPPoE, Static IP. These types are listed in the screen for the Internet
Connection Type setting of the WAN Setup section. Users can choose the
corresponding connection mode according to their situation. The default setting for
Router is Dynamic IP.
When finished making your changes on this screen, click the Save button to save
these changes.
4.2.1 For Dynamic IP Setting
Select "Dynamic IP User" button.
You can click the "MAC Clone" button to copy the MAC Address of your PC to be
the MAC address of this device.
You can return default Physical address as you click "Default MAC"
The MTU feature specifies the largest packet size permitted for network
transmission. Enter the value desired, for most Router users, it is recommended
to use1496. By default, MTU is set at1496.
Primary DNS and Secondary DNS, DNS (Domain Name System) Server IP
must be filled up when the ISP Provider provide these information to you, if the
ISP Provider provides Dynamic IP Address, then you can skip on these dialog
box.
Click "Apply" button then finish of setting.
X10 Broadband Router Use's Guide
Figure 4-4
Figure 4-5
17