X10 Broadband Router Use’s Guide Introduction·······································································································4 1.1 Features ······································································································4 1.2 Package Contents ·······················································································5 Appearance Illustration····················································································6 2.1 Panel ···········································································································6 2.1.1 Front Panel ························································································6 2.1.2 Rear Panel ························································································6 2.2 Illustration ····································································································6 2.3 Illustration of router Indicators ·····································································6 2.4 Working environment···················································································7 Setup your computer ·······················································································8 3.1 Connect the Router······················································································8...
Page 3
X10 Broadband Router Use’s Guide 4.8.7 Firmware Upgrade···········································································31 Troubleshooting ·····························································································32 5.1 Forget Password (Reset the Router without Login) ···································32 5.2 Problems Related to Connection with Cable Modem·································32 5.3 Problems Related to Connection with DSL Modem ···································33 5.4 How to Setup Your Computer to Get IP Address Manually ························33...
X10 Broadband Router Use’s Guide Introduction This router is a 4-port Cable/DSL Broadband Router. It provides you an easy and stable way to share your Cable/DSL high speed Internet connection. The built-in NAT technology can act as a firewall to protect your internal network against outside hackers.
X10 Broadband Router Use’s Guide 1.2 Package Contents X10 (4-port Cable/DSL Broadband Router) Power Adapter User Manual NOTE: 1. If any of the above items are missing, please contact your reseller. 2. Please check the voltage of your power supply before using the power adapter.
X10 Broadband Router Use’s Guide Appearance Illustration 2.1 Panel 2.1.1 Front Panel Figure 2-1 2.1.2 Rear Panel Figure 2-2 2.2 Illustration Power Status Indicator Activity Status (Status) (Power) Link/Act • On – Lan connected • Off – LAN Disconnected •...
X10 Broadband Router Use’s Guide - 10 sec : Factory default WAN port (10/100Mbps) Connect to DSL or Cable modem LAN port (10/100Mbps) Connect to PC or Switch with using Cat.5 cable Power For Power adapter 2.4 Working environment Figure 2-3 As the above figure shows, Router could be connected with four LAN (local area network) computers directly.
X10 Broadband Router Use’s Guide Setup your computer 3.1 Connect the Router Please follow the steps below to connect the modem and your computers with the Router: 1. Make sure that all network devices are powered off, including the Router, PCs, switches, cable or DSL modem, and peripherals.
X10 Broadband Router Use’s Guide selecting them and clicking Remove. 9. From the DNS Configuration dialog box, remove all entries from the DNS Server Search Order box by selecting them and clicking Remove. Remove all entries from the Domain Suffix Search Order box by selecting them and clicking Remove. Click Disable DNS.
Page 10
X10 Broadband Router Use’s Guide Figure 3-2 4. Highlight Internet Protocol (TCP/IP), and then press Properties button Figure 3-3...
Page 11
X10 Broadband Router Use’s Guide 5. Choose Obtain an IP address automatically and Obtain DNS server address automatically, and then press OK to close the Internet Protocol (TCP/IP) Properties window Figure 3-4 6. Press OK to close the Local Area Connection Properties window...
X10 Broadband Router Use’s Guide 3.4 Windows XP Please follow the steps below to setup your computer: 1. Go to Start Settings Control Panel 2. Click Network and Internet Connections Figure 3-6 3. Click Network Connections Figure 3-7...
Page 13
X10 Broadband Router Use’s Guide 4. Highlight the icon Local Area Connection, right click your mouse, click Properties Figure 3-8 5. Highlight Internet Protocol (TCP/IP), and then press Properties button Figure 3-9...
Page 14
X10 Broadband Router Use’s Guide 6. Choose Obtain an IP address automatically and Obtain DNS server address automatically, and then press OK to close the Internet Protocol (TCP/IP) Properties window Figure 3-10 7. Press OK to close the Local Area Connection Properties window...
X10 Broadband Router Use’s Guide Configuring the Router Before you configure this device, note that when the Broadband Router is configured through an Ethernet connection, make sure the host PC must be set on the IP subnetwork that can be accessed by the Broadband Router. For example, when the default network address of the Broadband Router Ethernet interface is 192.168.10.x,...
X10 Broadband Router Use’s Guide 4.1 Status When finish configuring the WAN/LAN Setup, the Status screen will list up the connection status for the Broadband Routers' WAN/LAN interfaces, firmware version numbers. Figure 4-2 4.1.1 Statistics View the statistics of packets sent and received on WAN interface.
X10 Broadband Router Use’s Guide automatically), PPPoE, Static IP. These types are listed in the screen for the Internet Connection Type setting of the WAN Setup section. Users can choose the corresponding connection mode according to their situation. The default setting for Router is Dynamic IP.
X10 Broadband Router Use’s Guide NOTE: Some ISPs may require you to register the MAC address of your card/adapter .So It is recommended that the PC registered with the ISP is used to setup the MAC Address Clone. When finished making your changes on this screen, click the Save button to save these changes.
X10 Broadband Router Use’s Guide Figure 4-6 When finished making your changes on this screen, click the Save button to save these changes. 4.2.3 For Static IP Setting Input the IP Address sub mask ,Primary DNS , Secondary DNS and Gateway provided by your ISP.
X10 Broadband Router Use’s Guide Figure 4-7 When finished making your changes on this screen, click the Save button to save these changes. 4.3 LAN Setup The LAN Setup screen below allows you to specify a private IP address for your router’s LAN ports as well as a subnet mask for your LAN segment.
X10 Broadband Router Use’s Guide assign a particular IP to it. Enter the relative values and then click ADD. Also you can check the “Auto Setup” checkbox button to assign a particular IP to your computer. Current Address Reserving Table: This display shows the valid reserving IPs in Broadband Router.
X10 Broadband Router Use’s Guide 4.5 NAT Network Address Translation (NAT) allows multiple users at your local site to access the Internet through a single Public IP Address. NAT provides Firewall protection from hacker attacks and has the flexibility to allow you to map Private IP Addresses to Public IP Addresses for key services such as Websites and FTP.
X10 Broadband Router Use’s Guide and expose it to the outside network. Outside user can browse inside web server directly while it is protected by NAT. Figure 4-12 Rule Name: The description of this setting. Internal Server IP Address: This is the LAN client/host IP address that the Public Port number packet will be sent to.
Page 24
X10 Broadband Router Use’s Guide Figure 4-13 Predefined Trigger Rules: You can select one of the predefined rules. Rule Name: Enter any name you want to use for the Application Name. Trigger Protocol: Select whether the outbound port protocol is “TCP”, “UDP”...
X10 Broadband Router Use’s Guide When finished making your changes on this screen, click the Save button to save these changes. 4.6 Fire Wall The Broadband Router provides extensive firewall protection by restricting connection parameters to limit the risk of hacker attack, and defending against a wide array of common hacker attacks.
X10 Broadband Router Use’s Guide table and then click "Delete ". When finished making your changes on this screen, click the Save button to save these changes. 4.6.2 Connection Filtering Configuration To control a certain client PCs accessing the Internet based on time. You can filter Internet access for local clients based on IP addresses, application types, (i.e.,...
X10 Broadband Router Use’s Guide Destination Port. You can assign up to a port number or a port range. The router will block clients from accessing Internet services that use these ports. Days To Block, Chose days to block Times To Block, Chose time to block.
X10 Broadband Router Use’s Guide Figure 4-17 DynDNS Operation. Before you can use this feature, you need to sign up for DDNS service the DDNS service currently incorporated,DynDNS.org. If you do not want to use this feature, keep the default setting Stop.
X10 Broadband Router Use’s Guide NOTE: If you forget your password, you’ll have to reset the router to the factory default (Password is “guest”) with the reset button (see router’s front panel). Click "Apply" button to finish the setting When finished making your changes on this screen, click the Save button to save these changes.
X10 Broadband Router Use’s Guide When finished making your changes on this screen, click the Save button to save these changes. 4.8.4 System Time Setup System Time Setup allows your router to base its time on the settings configured here, this will affect functions such as Firewall settings.
X10 Broadband Router Use’s Guide Figure 4-25 4.8.6.2 Restart System Click "Restart System" button to reboot router. Figure 4-26 4.8.7 Firmware Upgrade Upgrade the Broadband router’s system firmware. To upgrade the firmware of your Broadband router, you need to download the firmware file to your local hard disk, and enter that file name and path in the appropriate field on this page.
X10 Broadband Router Use’s Guide Troubleshooting Forget Password (Reset the Router without Login) 1. Use a pencil to press and hold the default button on the front panel of the Router for 3~5 seconds. 2. Plug out the power of the Router, wait for 5 seconds, and then plug in again.
X10 Broadband Router Use’s Guide Figure 5-1 5. Close the Internet Explorer window. Problems Related to Connection with DSL Modem Please follow the following steps to check the problems: 1. Check whether the DSL modem works well or the signal is stable. Normally there will be some indicator lights on the modem, users can check whether the signal is ok or the modem works well from those lights.
Page 34
X10 Broadband Router Use’s Guide 2. Click Network and Internet Connections Figure 5-2 3. Click Network Connections Figure 5-3 4. Highlight the icon Local Area Connection, right click your mouse, click Properties...
Page 35
X10 Broadband Router Use’s Guide Figure 5-4 5. Highlight Internet Protocol (TCP/IP), and then press Properties button Figure 5-5 6. Choose Use the following IP address and Use the following DNS server addresses, and then IP address: 192.168.10.XXX, the “XXX” shown here is a number between 2 and Subnet mask: 255.255.255.0...
Page 36
X10 Broadband Router Use’s Guide Preferred DNS server: 192.168.10.1 Alternate DNS server: leave it blank Press OK to close this window. Figure 5-6 7. Press OK to close the Local Area Connection Properties window Figure 5-7...
X10 Broadband Router Use’s Guide to be affixed only to the main control unit. The user’s manual or instruction manual for the EUT shall contain the following statement or equivalent. Caution: Changes or Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the...