Orientation And Controls; Setting The Volume; Setting Procedures; Switching The Hourly Time Announcement On Or Off - RNIB CC36 Instruction Manual

The clock is cube-shaped with rounded corners. The speaker grill is at the
front and the large time announcement button is on the top of the unit.
At the back of the clock there are two smaller buttons and a rotary volume
control.
Please note: The clock is supplied with 4 × AA batteries, which are packed in
with the product. Please see below for instructions on how to insert.

Orientation and controls

With the large circular button on the top and the speaker grill facing away from
you, the main controls are to be found underneath the back cover. The square-
shaped button on the left is the "mode" button and the circular button on the
right is the "set" button. Also at the back of the clock, in the centre, there is the
rotary volume control which is used to adjust the volume of the speech and
other sounds from the clock's speaker.

Setting the volume

You should use the time announcement button at the top in conjunction with
the rotary volume control to verify and adjust the volume level.

Setting procedures

At the back of the clock, underneath the back cover are two buttons. These are
used to set up the clock. The square mode button on the left is used to cycle
through the various clock functions.
Each of the functions will now be described in turn, following the order in which
they will be found when you start using the clock for the first time.

Switching the hourly time announcement on or off

After pressing the mode button (on the left), once, the unit will say "announce
off". You can then press the circular button (on the right), once, and the clock
will say "announce on". When you press the button again, the clock will say
"announce off". At any time during set up you can press the large circular
button on top of the clock to return to current time announcement mode or you
can simply proceed to the next mode by pressing the square mode button
once more.
2