Charging The Battery Pack; Connecting The Rechargeable Battery Pack To The Power Supply Or Ac Adapter - Sartorius YRB 01 Z Operating Instructions Manual

Charging the Battery Pack

The battery pack is charged by the balance/scale's
power supply or AC adapter. If the plug design on the
power supply/AC adapter does not match the socket
on the rechargeable battery pack, please contact your
Sartorius office or dealer.
Use only original Sartorius power supplies/AC adapters
to recharge the battery pack. Use of power supplies/AC
adapters from other manufacturers, even if these units
have an approval identification marking from a nation-
al testing laboratory, requires the approval of a quali-
fied Sartorius service technician.
When the rechargeable battery pack has been stored
for a relatively long period, it may be discharged. After
startup, the power supply/AC adapter should remain
connected to line power for the following minimum
periods to charge the battery pack:
Model
YRB 01 Z
YRB 02 Z,
YRB 04 Z
YRB 05 Z, YRB 06 Z
Connecting the Rechargeable Battery Pack to the
Power Supply or AC adapter
Plug the cord of the rechargeable battery pack into
the power supply or AC adapter.
YRB 01 Z, YRB 02 Z and YRB 05 Z:
Insert the plug into the jack on the rechargeable battery
pack as shown.
YRB 04 Z and YRB 06 Z:
Insert the right-angle plug into the socket on the
rechargeable battery pack as shown. Then tighten the
slotted screw using a screwdriver.
Time necessary to recharge
5 hours
15 hours
5