Startup; Connecting The Balance/Scale To The Rechargeable Battery Pack; Battery Power Indicator (Led) On The Yrb 05 Z And Yrb 06 Z - Sartorius YRB 01 Z Operating Instructions Manual

4

Startup

Connecting the Balance/Scale to the
Rechargeable Battery Pack
Plug the cord of the rechargeable battery pack
into the power receptacle of the balance/scale as
described below.
YRB 01 Z, YRB 02 Z, YRB 05 Z:
Insert the plug of the cord into the jack on the bal-
ance/scale as shown.
YRB 04 Z and YRB 06 Z:
Insert the right-angle plug into the socket on the bal-
ance/scale as shown. Then tighten the slotted screw
using a screwdriver.
Battery Power Indicator (LED)
on the YRB 05 Z and YRB 06 Z
LED on continuously: 100% to approx. 20% battery
Flashing LED:
When the LED flashes, the battery pack needs to be
recharged (see next page).
Recharge the battery pack promptly to prevent damage
caused by deep discharging (see footnote on page 6).
power available
less than approx. 20% battery
power available