Table of Contents
Advertisement
when the latch cirguit is on. V
8V typical and is prevented from abnormally rising. Fig. 12 shows an example of V
waveform.Cancellation of the latch-is done by decreasing V
can be restarted after disconnecting an AC input to the power supply once.
VIN
8V
(TYP)
4.9V
(TYP)
Fig 12 Typical V
8) Thermal shutdown, circuit
It is a circuit to trigger the latch circuit when the frame temperature of the IC exceeds 150°C (typical). Although
the temperature is actually sensed at the control chip. It works against overheating of the power transistor as
the power transistor and the control IC are mounted on the same lead frame.
9) Overvoltage protection circuit
It is a circuit to trigger the latch circuit when V
functions as protection of V
winding of the transformer and the voltage is proportional to the output voltage, it also functions against the
overvoltage of secondary output which causes when the control circuit opens or in some other events.
terminal voltage increases and decreases with- in the range from 4.9V typical to
IN
Terminal Voltage Waveform When Latch Circuit Is Operating
IN
terminal against overvoltage, since V
IN
terminal voltage below 3.3V. The power supply
IN
0
terminal voltage exceeds 11V (typical). Although it basically
IN
terminal is usually supplied from the drive
IN
24
terminal voltage
IN
Advertisement
Table of Contents
