Sony DAV-HDX277WC Operating Instructions Manual page 71

**
Depending on the country model, [720 x 576p] may
appear.
• [CONTROL FOR HOMI]
You can set the [CONTROL FOR HDMI]
function to on/off. This function is available
when you connect the system and TV with an
HOMI cable. For details, see "Using the Control
for HDMI Function for "BRAVIA" Sync"
(page 79).
[OFF]: Off.
[ON]: On. You can operate mutually between
components that are connected with an HDMI
cable.
1m
• When you set to [ON] without the HDMI connection
of the TV, [Please verify the HDMI connection.]
appears and you cannot set to [ON].
• [VOLUME LIMIT]
If you change the output method of the TV to the
system speaker on the TV menu or by pressing
THEATER, the System Audio Control
(page 81) is activated and loud sound may be
output depending on the volume level of the
system. You can prevent this by limiting the
maximum level of the volume.
[LEVEL3]: Maximum volume level is set to 10.
[LEVEL2]: Maximum volume level is set to 15.
[LEVELl]: Maximum volume level is set to 20.
[OFF]: Off.
1m
• This function is available only when [CONTROL
FOR HDMI] is set to [ON].
• [YCBCRlRGB (HOMI)]
You can select the type of HDMI signal output
from HDMI OUT jack.
[YCBCR]: The system outputs YCBCR signals.
[RGB]: The system outputs RGB signals.
1m
• If the playback picture becomes distorted, set
[YCBCR] to [RGB].
• If the HOMI OUT jack is connected to a component
with a DVI jack, [RGB] signals will be automatically
output even when you select [YCBCR].
• [AUOIO (HOMI)]
You can select the audio output status from the
HDMI OUT jack.
[OFF]: The system does not output the sound
from the HDMI OUT jack.
[ON]: The system outputs audio signals by
converting Dolby Digital, DTS, or 96 kHzl24 bit
PCM signals to 48 kHzll6 bit PCM.
1m
• When you connect the unit and TV with an HDMI
cable and [ON] is selected, [AUDIO DRe], [AN
SYNC], DYNAMIC BASS, "DEC. MODE," and
sound mode are not applied to the sound that is output
from the TV.
• When you set the function to other than "DVD," the
system does not output the sound from the HDMI
OUT jack even if you set [AUDIO (HDMI)] to [ON].
• [JPEG RESOLUTION]
You can select the resolution of lPEG image
files output from the HDMI OUT jack.
[SO 0]: The system outputs standard
resolution with a black frame.
[HD 0]: The system outputs HD resolution
with a black frame.
[HD]: The system outputs the HD resolution
without a black frame.
[(1920 x 1080i) HD
0]:
The system outputs
full size HD resolution with a black frame.
[(1920 x 1080i) HD]: The system outputs full
size HD resolution without a black frame.
1m
• [IPEG RESOLUTION] is effective only when you
set [TV TYPE] in [VIDEO SETUP] to [16:9], and
you set [HDMI RESOLUTION] in [HDMI SETUP]
to other than [720 x 480p] or [720 x 576p].
• You can select [(1920 x 1080i) HD
0 ]
or [(1920 x
1080i) HD] only when you set [HDMI
RESOLUTION] in [HDMl SETUP] to [1920 x
1080i].
• If you select [(1920 x 1080i) HD 0 ] or [(1920 x
1080i) HD], the next image appears after the black
screen.
• HOMl signal will stop momentarily when:
- The system is loading or unloading a DATA CD or
DATA OVD.
- You change the disc from a DATA CD or DATA
DVD.
•
c
0"
n
71 US