Table of Contents
Advertisement
STEP 4: Apply the new sticker
2.2 Changing filament
If you are ready to use a different role of filament for your next print, follow these steps to remove
your current role of filament.
STEP 1: Preheat your printer by selecting the
preheat icon in your screen and pushing the
button. Make sure the nozzle which contains
the filament you are about to exchange heats
up to at least 180 degrees Celsius.
STEP 1: Preheat your printer
STEP 2: Select the filament icon in your screen
and enter this menu by pushing the button. Se-
lect the extruder from which you want to re-
move the filament and select 'unload' . The drive
unit will retract the filament.
STEP 2: Select 'unload'
STEP 3: Pull the quick release knob on the back
and pull the filament out all the way from the
feeding hole on the bottom. Make sure you roll
up your role of filament carefully and that the
end cannot get loose. Tangled filament can af-
fect the print the next time you use it.
STEP 3: Pull the quick release knob.
Preparing for your next print
10
Advertisement
Table of Contents
